Refer to the exhibit.

The customer is trying to configure a rendezvous point, but for some reason it is failing. Which
configuration should be applied on both Nexus devices to configure the rendezvous point?

A.
RT-2(config)#ip pim send-rp-discovery loopback10
RT-2(config)#interface lo0

B.
RT-2(config-if)#ip pim-sparse
RT-2(config)#ip pim send-rp-announce lo10 group-list 239.0.0.0/24
RT-2(config)#interface lo0
RT-2(config-if)#ip pim-sparse

C.
RT-2(config)#ip pim send-rp-discovery loopback10
RT-2(config)#interface lo0
RT-2(config-if)#ip pim-sparse

D.
RT-1(config)#interface Vlan106

E.
RT-1(config-if)#no ip pim border
RT-2(config)# ip pim send-rp-announce lo10 group-list 239.0.0.0/24
RT-2(config)#interface lo0
RT-2(config-if)#ip pim-sparse

F.
RT-1(config)#interface Vlan106

G.
RT-1(config-if)#no ip pim border
RT-2(config)# ip pim send-rp-discovery loopback10

H.
RT-1(config)#interface Vlan106
RT-1(config-if)#no ip pim border