What two options are performed during initial setup of a UCS Manager? (Choose two.)
A.
Configuring Nodes
B.
Configuring Servers
C.
Configure Routing
D.
Configure Equipment Policy
E.
Configure Ports
Get 50% Discount on All Your Purchases
at PrepAway.com - Latest Exam Questions
This is ONE TIME OFFER
50%
None of the answers are correct i belief: (From the cisco Press book)
Enter the installation method (console/gui)? console
Enter the setup mode (restore from backup or initial setup) [restore/setup]? setup
You have chosen to setup a new switch. Continue? (y/n): y
Enter the password for “admin”: P@ssw0rd
Confirm the password for “admin”: P@ssw0rd
Do you want to create a new cluster on this switch (select ‘no’ for standalone setup or if
you want this switch to be added to an existing cluster)? (yes/no) [n]: yes
Enter the switch fabric (A/B): A
Enter the system name: foobar
Mgmt0 IPv4 address: 192.168.10.10
Mgmt0 IPv4 netmask: 255.255.255.0
IPv4 address of the default gateway: 192.168.10.1
Virtual IPv4 address: 192.168.10.30
Configure the DNS Server IPv4 address? (yes/no) [n]: yes
DNS IPv4 address: 192.168.50.10
Configure the default domain name? (yes/no) [n]: yes
Default domain name: domainname.com
Join centralized management environment (UCS Central)? (yes/no) [n]: no
Following configurations will be applied:
Switch Fabric = A
System Name = foobar
Management IP Address = 192.168.10.10
Management IP Netmask = 255.255.255.0
Default Gateway = 192.168.10.1
Cluster Enabled = yes
Virtual Ip Address = 192.168.10.30
DNS Server = 192.168.50.10
Domain Name = domainname.com
Apply and save the configuration (select ‘no’ if you want to re-enter)? (yes/no): yes
0
0
Given answer is correct. The steps Palermo listed are for fabric interconnects. See https://speakvirtual.com/2013/02/08/cisco-ucs-101-installation-and-basic-config-2/ for a full UCS config. It is a great walkthrough.
0
0