Use the exhibits below to answer the question.
What two issues could be causing the Cisco Jabber failure shown in the exhibit? (Choose two)
A.
Incorrect username and password
B.
IM & Presence server is down
C.
User is not associated with the device
D.
IP or DNS name resolution issue
E.
CSF Device is not registered.
F.
IP Phone DN not associated with the user
Explanation:
The error message shown in Jabber is “Cannot communicate with the server” which points us to a
connectivity issue with IP/DNS or the server is down. All other answer choices would result in a
login failure, not communication error.
…..Answer C. is TECHNICALLY correct here, since the MAC address in the presented material is wrong, it is clear that this device is not the one associate in IM/P
Please correct the images so the source material matches the question.
0
0
That would not prevent you from communicating with the server, but would prevent presence from being accurate.
0
0
I was recommended by one of my friend, he used the 210-060 dumps and said they are helpful. He was right! I passed my Cisco 210-060 exam yesterday. I was lucky, all my questions in the exams were from this dumps:
QUESTION 181
How a MGCP CALL AGENT route calls?
A. route-pattern
Answer: A
QUESTION 182
Where to add user voicemail in Unity?
A. In users
Answer: A
QUESTION 183
Creating a hunt group/ring group, where to be able to change the DN/ for all the devices at once?
A. Hunt pilot
Answer: A
QUESTION 184
Which type of data file is used for bulk import of users into Cisco Unity Connection?
A. .xls
B. .doc
C. .csv
D. .pdf
Answer: C
QUESTION 185
Refer to the exhibit. Which Cisco Unified Communications platform is being utilized?
A. Cisco Unified Communications Manager Express
B. Cisco Unified Presence
C. Cisco Unity Connection
D. Cisco Unified Communications Manager
Answer: A
QUESTION 186
An engineer is adding MCU 4500 to Cisco Unified Communications Manager. Which two configuration areas within Cisco Unified Communications Manager allow the engineer to perform this task? (Choose two.)
A. TFTP services
B. SIP endpoint
C. media bridge
D. SCCp endpoint
Answer: BC
QUESTION 187
Which three options are the correct methods to implement end users in Cisco Unified Communications Manager? (Choose three.)
A. manually
B. DHCP
C. bulk import using BAT
D. TFTP
E. LDAP synchronization
F. autoregistration
Answer: ACE
QUESTION 188
With GETVPN, if a key server is configured to use multicast as the rekey transport mechanism, then under which of these conditions will the key server retransmit the rekey messages?
A. It never retransmit the rekey messages
B. it only retransmit the rekey message when it does not receive the rekey acknowledgment from at least one group member
C. it only retransmit the rekey message when it does not receive the rekey acknowledgment from all group member
D. it only retransmit the rekey message when DPD to the group members fails
E. it always retransmit the rekey message
Answer: E
QUESTION 189
Which four fields are required when manually configuring IP phones in Cisco Unified Communications Manager? (Choose four.)
A. MAC Address
B. IP Address
C. Hunt Group
D. VLAN ID
E. Device Pool
F. Phone Button Template
G. Dial Peer
H. Device Security Profile
Answer: AEFH
QUESTION 190
Refer to the exhibit. The error message was displayed when the administrator attempted to set the default user password in the user template to four digits long. Which option can rectify this issue?
A. The minimum password length in Cisco Unity Connection should be at least five digits long.
B. The password length needs to be configured under the Authentication Rules settings using the Minimum Credential Length configuration field.
C. The password length needs to be configured under the user template settings using the Minimum Credential Length configuration field.
D. The password length cannot be adjusted under the user template; the password length can only be adjusted under the individual users.
Answer: B
QUESTION 191
In Cisco Unified Communications Manager Native Presence, what two things is a watcher monitoring in real time? (Choose two.)
A. registration status of a specific IP phone
B. registration status of the hunt group
C. registration status of the MGCP gateway
D. registration status of Cisco Extension Mobility of the IP phone
E. status of a registered directory number
Answer: AE
QUESTION 192
A user in Cisco Unified Communications Manager Administration has been added to the Standard CCM Admin Users group, which includes the Standard CCMADMIN Administration role, but the user cannot add new users. What is the cause of this issue?
A. The add user capability has been disabled for the group
B. The incorrect group and role were assigned.
C. The add user capability has been disabled for the role.
D. Only the CCMAdmin user can add users.
E. Users can be added only via LDAP
Answer: C
QUESTION 193
An administrator is attempting to add a new IP phone to the network. The phone does not register and continues to cycle through the registration process. The administrator checks and notices that the IP address assigned to the phone is not in the correct network. What is the cause of this issue?
A. The TFTP server is misconfigured.
B. The DHCP server is giving out false IP addresses.
C. The Cisco Unified Communications Manager is down.
D. The switch port that the phone is connected to is configured with the wrong voice VLAN.
E. The PSTN gateway is down.
Answer: D
QUESTION 194
Which four characteristics are associated with video? (Choose four)
A. greedy
B. TCP retransmits
C. UDP priority
D. delay sensitive
E. drop sensitive
F. benign
G. bursty
Answer: ACDG
QUESTION 195
Which two directory services are supported by Cisco Unified Communications Manager for Lightweight Directory Access Protocol integration? (Choose two.)
A. Windows Active Directory 2008
B. Novell eDirectory
C. iPlanet Directory Server 4.0
D. Sun ONE Directory Server
E. Open Lightweight Directory Access Protocol 2.1
Answer: AD
QUESTION 196
Which three characteristics are associated with voice? (Choose three.)
A. greedy
B. TCP retransmits
C. UDP priority
D. delay sensitive
E. drop insensitive
F. benign
G. benign or greedy
Answer: CDF
QUESTION 197
Of the fields listed, which two fields are required to successfully create a phone user in Cisco Unified Communications Manager? (Choose two.)
A. Last Name
B. PIN (and confirmation PIN)
C. Primary Extension
D. User ID
Answer: AD
QUESTION 198
Which standard protocol is utilized for signaling between the Cisco Unified Communications Manager Express router and the Cisco Unity Express module?
A. SCCP
B. HTEMS
C. SIP
D. XCP
Answer: C
QUESTION 199
……
I have uploaded all the real questions of 210-060 exam to my Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDN25QVlRta3F0UkE
Welcome to download them freely!
0
0
New 210-060 Exam Questions Free Download.v.2018-1-9.254q
QUESTION 226
What allows a phone user to log a phone out of all line groups to which the phone directory numbers belong?
A. Cisco IPPA
B. Cisco Finesse
C. HLog softkey
D. Cisco Agent Desktop
Answer: C
Explanation:
https://supportforums.cisco.com/t5/other-collaboration-voice-and/allowing-cfa-for-a-phone-in-a-hunt-group/td-p/1264535
QUESTION 227
Several users in the same Call Manager group reported that they receive a fast busy tone when they go off hook. They reported that the issue went away after a few minutes. Where should the voice systems administrator begin troubleshooting?
A. SIP gateway
B. Cisco Unified Communications Manager subscriber
C. network cable
D. 7945 IP phone
Answer: B
QUESTION 228
Which two explanations of DTMF dialing are true? (Choose two.)
A. DTMF dialing consists of simultaneous voice-band tones generated when a button is pressed on a telephone.
B. The use of DTMF enables support for advanced telephony services.
C. DTMF dialing uses INVITE messages to signal when the first digit is pressed in a new call.
D. DTMF dialing consists of a simultaneous digital-band pulse generated when a button is pressed on a telephone.
Answer: AB
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/sip/configuration/12-4t/sip-12-4t-book/voi-sip-dtmf.html#GUID-A23A02E9-3FD2-4C3A-8ED4-78BDC82AAEAE
QUESTION 229
How are calls routed in an MGCP call agent?
A. by route patterns on Cisco Unified Communications Manager
B. by dial peers on the gateway
C. by static routes on the gateway
D. by a translation pattern on Cisco Unified Communications Manager
Answer: A
QUESTION 230
A voice engineer has installed an XML-based phone application from a third party and subscribed a user’s 7945 IP phone to the application. Which action does the user take to launch the new service on the IP phone?
A. Select the Applications button on the 7945 IP phone.
B. Select Settings > Applications.
C. Select Settings > Network > Applications.
D. Select the Services button on the 7945 IP phone.
Answer: D
QUESTION 231
An administrator must keep CDR data for a longer period of time and wants to modify the configured value of the CDR/CMR Files Presentation Duration Days). Which menu options does the engineer navigate?
A. Unified CM Administration > System > Enterprise Parameters
B. Unified Serviceability > Tools > Serviceability Reports Archive
C. Unified CM Administration > Call Routing > Route Plan Report
D. Unified Serviceability > Tools > CDR Management
Answer: A
QUESTION 232
IP WAN failure has occurred. Which two configurations must be made to allow calls to or from an IP phone at a branch location to complete to a destination outside of that branch? (Choose two.)
A. Survivable Remote Site Telephony is configured on the branch router.
B. LAN failover configuration is set to Survivable Remote Site Telephony.
C. Call Forward UnRegistered option is configured on each branch phone profile.
D. POTS WAN failover is set to Survivable Remote Site Telephony.
E. An ISDN is configured as a primary survivable backup site
Answer: CE
Explanation:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab10/collab10/models.html
QUESTION 233
A voicemail user reports that he cannot access Cisco Unity Connection from the IP phone message button. Which option must you perform to resolve the problem?
A. In Cisco Unified Communications Manager, navigate to Advanced Features > Voicemail to confirm that the user has the correct voicemail profile
B. In Cisco Unified Communications Manager, navigate to Device > Phone to confirm that the device has the correct voicemail profile
C. In Cisco Unified Communications Manager, navigate to Device > Phone to confirm that the directory number has the correct voicemail profile
D. In Cisco Unified Communications Manager, navigate to User Management > End User to confirm that the user has the correct voicemail profile
E. In Cisco Unity Connection, navigate to Users > Users to confirm that the user web password is correct.
Answer: C
QUESTION 234
A user reports that during calls they hear excessive hissing when neither party is talking.
Which option is one cause of this noise?
A. QoS
B. LoPS
C. VAD
D. EPL
E. SRST
Answer: C
QUESTION 235
A network administrator finds directory number 77555 in the partition. Which numbers can reach 77555 in this situation?
A. Only numbers in the partition can reach 77555.
B. All numbers in every calling search space can reach 77555.
C. Only internal directory numbers can reach 77555.
D. Directory number 77555 cannot be reached by any number.
Answer: A
QUESTION 236
What is the maximum amount of packet loss an engineer should allow for voice traffic on an IP network?
A. 5 percent
B. 2 percent
C. 3 percent
D. 1 percent
Answer: A
0
0