Study this exhibit below carefully.

What is the effect of the distribute-list command in the R1 configuration?

A.
R1 will permit only the 10.0.0.0/24 route in the R2 RIP updates

B.
R1 will not filter any routes because there is no exact prefix match

C.
R1 will filter the 10.1.0.0/24 and the 172.24.1.0/24 routes from the R2 RIP updates

D.
R1 will filter only the 172.24.1.0/24 route from the R2 RIP updates

Explanation:
The command “distribute-list 10 in Serial0 will create an incoming distribute list for interface serial
0 and refers to access list 10. So it will permit routing updates from 10.0.x.x network while other
entries (in this case the 10.1.0.0/24 and 172.24.1.0/24 networks) will be filtered out from the
routing update received on interface S0.