Given the following configuration:
port-profile type ethernet DATA-UPLINK
vmware port-group
switchport trunk allowed vlan 1-3967,4048-4093
channel-group auto mode on
no shutdown
state enabled
port-profile type ethernet MGMT-UPLINK
vmware port-group
switchport trunk allowed vlan 10-12
channel-group auto mode on
no shutdown
state enabled
VEMs are seen to be joining and then are lost from the Cisco VSM. How would you resolve this
issue?

A.
Remove second NIC from each port profile

B.
Remove VEM from VSM (no vem X), remove NICs, and reinsert

C.
Ensure that VLANs on uplink profiles are not overlapping

D.
Reinstall VEM

E.
Issue the command “module vem X execute vemcmd set pinning module vsm 1”

Explanation: