EIGRP
After adding RTR_2 router, no routing updates are being exchanged between RTR_1 and the new location. All other inter connectivity and internet accesses for the existing locations of the company are working properly.
The task is to identify the fault(s) and correct the router configuration to provide full connectivity between the routers.
Access to the router CLI can be gained by clicking on the appropriate host.
All passwords on all routers are Cisco.
IP addresses are listed in the chart below.
RTR_A#show run
!
!
interface FastEthernet0/0
ip address 192.168.60.97 255.255.255.240
!
interface FastEthernet0/1
ip address 192.168.60.113 255.255.255.240
!
interface Serial0/0
ip address 192.168.36.14 255.255.255.252
!
router eigrp 212
network 192.168.36.0
network 192.168.60.0
no auto-summary
!
RTR_A#show ip route
192.168.36.0/30 is subnetted, 1 subnets
C 192.168.36.12 is directly connected, Serial 0/0
192.168.60.0/24 is variably subnetted, 5 subnets, 2 masks
C 192.168.60.96/28 is directly connected, FastEthernet0/0
C 192.168.60.112/28 is directly connected, FastEthernet0/1
D 192.168.60.128/28 [ 90/21026560 ] via 192.168.36.13, 00:00:57, Serial 0/0
D 192.168.60.144/28 [ 90/21026560 ] via 192.168.36.13, 00:00:57, Serial 0/0
D 192.168.60.24/30 [ 90/21026560 ] via 192.168.36.13, 00:00:57, Serial 0/0
D* 198.0.18.0 [ 90/21026560 ] via 192.168.36.13, 00:00:57, Serial 0/0
*******************************************************************************
RTR_2#show run
!
!
interface FastEthernet0/0
ip address 192.168.77.34 255.255.255.252
!
interface FastEthernet0/1
ip address 192.168.60.65 255.255.255.240
!
interface FastEthernet1/0
ip address 192.168.60.81 255.255.255.240
!
!
router eigrp 22
network 192.168.77.0
network 192.168.60.0
no auto-summary
!
RTR_2#show ip route
192.168.60.0/28 is variably subnetted, 2 subnets
C 192.168.60.80 is directly connected, FastEthernet1/0
C 192.168.60.64 is directly connected, FastEthernet0/1
192.168.77.0/30 is subnetted, 1 subnets
C 192.168.77.32 is directly connected, FastEthernet0/0
**********************************************************
RTR_B#show run
!
interface FastEthernet0/0
ip address 192.168.60.129 255.255.255.240
!
interface FastEthernet0/1
ip address 192.168.60.145 255.255.255.240
!
interface Serial0/1
ip address 192.168.60.26 255.255.255.252
!
router eigrp 212
network 192.168.60.0
!
RTR_B#show ip route
192.168.60.0/24 is variably subnetted, 5 subnets, 2 masks
C 192.168.60.24/30 is directly connected, Serial0/1
C 192.168.60.128/28 is directly connected, FastEthernet0/0
C 192.168.60.144/28 is directly connected, FastEthernet0/1
D 192.168.60.96/28 [ 90/21026560 ] via 192.168.60.25, 00:00:57, Serial 0/1
D 192.168.60.112/28 [ 90/21026560 ] via 192.168.60.25, 00:00:57, Serial 0/1
192.168.36.0/30 is subnetted, 1 subnets
D 192.168.36.12 [ 90/21026560 ] via 192.168.60.25, 00:00:57, Serial 0/1
D* 198.0.18.0 [ 90/21026560 ] via 192.168.60.25, 00:00:57, Serial 0/1
**************************************************************************
RTR_1#show run
!
!
interface FastEthernet0/0
ip address 192.168.77.33 255.255.255.252
!
interface Serial1/0
ip address 198.0.18.6 255.255.255.0
clockrate 64000
!
!
interface Serial0/0
ip address 192.168.36.13 255.255.255.252
clockrate 64000
!
interface Serial0/1
ip address 192.168.60.25 255.255.255.252
clockrate 64000
!
!
router eigrp 212
network 192.168.36.0
network 192.168.60.0
network 192.168.85.0
network 198.0.18.0
no auto-summary
!
ip classless
ip default-network 198.0.18.0
ip route 0.0.0.0 0.0.0.0 198.0.18.5
ip http server
RTR_1#show ip route
192.168.36.0/30 is subnetted, 1 subnets
C 192.168.36.12 is directly connected, Serial 0/0
192.168.60.0/24 is variably subnetted, 5 subnets, 2 masks
C 192.168.60.24/30 is directly connected, Serial0/1
D 192.168.60.128/28 [ 90/21026560 ] via 192.168.60.26, 00:00:57, Serial 0/1
D 192.168.60.144/28 [ 90/21026560 ] via 192.168.60.26, 00:00:57, Serial 0/1
D 192.168.60.96/28 [ 90/21026560 ] via 192.168.36.14, 00:00:57, Serial 0/0
192.168.77.0/30 is subnetted, 1 subnets
C 192.168.77.32 is directly connected, FastEthernet0/0
C 192.0.18.0/24 is directly connected, Serial 1/0
*S 0.0.0.0 via 198.0.18.5
Answer: RTR_A#show run
Explanation:
!
!
interface FastEthernet0/0
ip address 192.168.60.97 255.255.255.240
!
interface FastEthernet0/1
ip address 192.168.60.113 255.255.255.240
I
interface Serial0/0
ip address 192.168.36.14 255.255.255.252
lockrate 64000
|
router eigrp 212
network 192.168.36.0
network 192.168.60.0
no auto-summary I
RTR_A#show ip route
192.168. 36. 0/30 is subnetted, 1 subnets
C 192.168. 36.12 is directly connected, Serial 0/0
192.168. 60. 0/24 is variably subnetted, 5 subnets, 2 masks C 192.168. 60. 96/28 is directly connected, FastEthernetO/0 C 192.168. 60.112/28 is directly connected, FastEthernetO/1 D 192. 168.60. 128/28 [90/21026560] via 192. 168.36. 13, 00:00:57, Serial 0/0 D 192. 168.60. 144/28 [90/21026560] via 192. 168.36. 13, 00:00:57, Serial 0/0 D 192. 168. 60. 24/30 [90/21026560] via 192. 168.36. 13, 00:00:57, Serial 0/0 D* 198.0. 18. 0(90/21026560] via 192. 168.36. 13, 00:00:57, Serial 0/0 ****************************************************************************************** RTR_2#show run
!
!
interface FastEthernet0/0
ip address 192.168.77.34 255.255.255.252
!
interface FastEthernet0/1
ip address 192.168.60.65 255.255.255.240
interface FastEthemet1/0ip address 192.168.60.81 255.255.255.240
|
|
No router eigrp 22 — Wrong AS was configured, remove and add router eigrp 212 router eigrp 212
network 192.168.77.0
network 192.168.60.0
no auto-summary
!
RTR_2#show ip route
192.168. 60. 0/28 is variably subnetted. 2 subnets
C 192.168.60.80 is directly connected. FastEthernet1/0 C 192.168.60.64 is directly connected. FastEthernet0/1 192. 168.77.0/30 is subnetted. 1 subnets
C 192.168.77.32 is directly connected. FastEthemet0/0 ****************************************************************** RTR_B#show run
!
interface FastEthernet0/0
ip address 192.168.60.129 255.255.255.240
!
interface FastEthernet0/1
ip address 192.168.60.145 255.255.255.240
!
interface Serial0/1
ip address 192.168.60.26 255.255.255.252
!
router eigrp 212 network 192.168.60.0
!
RTR_B#show ip route
192.168.60.0/24 is variably subnetted, 5 subnets, 2 masks C 192.168.60.24/30 is directly connected, Serial0/1
C 192.168.60.128/28 is directly connected, FastEthernet0/0 C 192.168.60.144/28 is directly connected, FastEthernet0/1 D 192.168.60.96/28 [90/21026560] via 192. 168. 60. 25, 00:00:57, Serial 0/1 D 192.168.60.112/28 [90/21026560] via 192. 168. 60. 25, 00:00:57, Serial 0/1 192.168.36.0/30 is subnetted, 1 subnets
D 192.168.36.12 [ 90/21026560 ] via 192. 168. 60. 25, 00:00:57, Serial 0/1 D* 198.0.18.0 [ 90/21026560 ] via 192. 168. 60. 25, 00:00:57, Serial 0/1 ****************************************************************************************** RTR_1#showrun!
!
interface FastEthernet0/0
ip address 192.168.77.33 255.255.255.252
!
interface Serial1/0
ip address 198.0.18.6 255.255.255.0
I
I
interface Serial0/0
ip address 192.168.36.13 255.255.255.252 clockrate 64000 I
interface Serial0/1
ip address 192.168.60.25 255.255.255.252 clockrate 64000 l
I
router eigrp 212
network 192.168.36.0
network 192.168.60.0
network 192.168.85.0
network 198.0.18.0
no auto-summary
!
ip classless
ip default-network 198.0.18.0
ip route 0 0.0.0 0.0.0.0 198 0.18.5 ip http server
RTR_1#show ip route
192.168.36. 0/30 is subnetted, 1 subnets
C 192.168.36.12 is directly connected. Serial 0/0
192.168.60. 0/24 is variably subnetted, 5 subnets, 2 masks C 192.168.60.24/30 is directly connected. Serial0/1
D 192.168.60.128/28 [ 90/21026560 ] via 192. 168. 60. 26. 00:00:57. Serial 0/1 D 192.168.60.144/28 [ 90/21026560 ] via 192. 168. 60. 26, 00:00:57, Serial 0/1 D 192.168.60.96/28 ( 90/21026560 ] via 192. 168. 36. 14, 00:00:57, Serial 0/0 192.168.77.0/30 is subnetted, 1 subnets
C 192.168.77.32 is directly connected. FastEthemet0/0 C 192.0.18.0/24 is directly connected. Serial 1/0
*S 0.0.0.0 via 198.0.18.5
Eigrp AS on R_2 is incorrect. This should be 212 and not 22
0
0