Find the problem in the following configuration:vpdn enablevpdn-group 1request-dialinprotocol pppoevirtual-template 2!interface atm 2/0.1 point-to-pointpvc 0/101encapsulation aal5snapprotocol pppoe!interface atm 2/0.2 point-to-pointpvc 0/102encapsulation aal5snapprotocol pppoe!interface atm 2/0.3 point-to-pointpvc 0/103encapsulation aal5snapprotocol pppoe!interface virtual-template 2ip unnumbered Fastethernet 4/0!interface FastEthernet 4/0ip address 172.22.32.1 255.255.255.0

A.
The ATM subinterfaces cannot be defined point to point.

B.
The encapsulation on the PVCs should be aal5mux.

C.
The VPDN-group definition should have the command ‘accept-dialin’ instead of the command ‘request-dialin’.

D.
A static IP address should be configured on the virtual template.

E.
The virtual template number should be the same as the VPDN-group number.