3 Comments on “Drag the definition on the left to the correct term on the right.”

1. Farooq says:

   September 25, 2015 at 12:58 pm

   -SNMP: a protocol used to monitor and manage network devices
   -FTP: a reliable, connection-oriented service that uses TCP to transfer files between systems
   -TFTP: a connectionless service that uses UDP to transfer files between systems
   -DNS: a protocol that converts human-readable names into machine-readable addresses
   -DHCP: used to assign IP addresses automatically and set parameters such as subnet mask and default gateway

   
   
   
   0

   
   
   
   0
2. ish says:

   February 28, 2016 at 3:08 am

   Simple Network Management Protocol (SNMP) is an Internet-standard protocol for collecting and organizing information about managed devices on IP networks and for modifying that information to change device behavior. Devices that typically support SNMP include routers, switches, servers, workstations, printers, modem racks and more.[1]
   SNMP is widely used in network management systems to monitor network-attached devices for conditions that warrant administrative attention. SNMP exposes management data in the form of variables on the managed systems, which describe the system configuration. These variables can then be queried (and sometimes set) by managing applications.

   Trivial File Transfer Protocol (TFTP) is a simple, lockstep, File Transfer Protocol which allows a client to get from or put a file onto a remote host. One of its primary uses is in the early stages of nodes booting from a local area network.

   Dynamic Host Configuration Protocol (DHCP) is a client/server protocol that automatically provides an Internet Protocol (IP) host with its IP address and other related configuration information such as the subnet mask and default gateway.

   
   
   
   0

   
   
   
   0
3. Pekovic says:

   March 24, 2016 at 7:25 am

   Simple Network Management Protocol (SNMP) is a popular protocol for network management. It is used for collecting information from, and configuring, network devices, such as servers, printers, hubs, switches, and routers on an Internet Protocol (IP) network.

   FTP must establish a connection at the TCP level before anything can be done by FTP itself.

   TFTP, however, uses the connectionless UDP for transport, so there is no connection in the sense that one exists in TCP. In TFTP, the connection is more in a “logical sense”, meaning that the client and server are participating in the protocol and exchanging TFTP messages.

   
   
   
   0

   
   
   
   0