DRAG DROP
Drag the Cisco MQC configuration task on the left to match the correct description on the right.

Answer: See the explanation

Explanation:
<map><m
x1=”9″ x2=”400″
y1=”47″ y2=”90″
ss=”0″ a=”0″ /><m
x1=”11″ x2=”400″
y1=”104
y2=”152″ ss=”0″ a=”0″ /><m x1=”13″ x2=”401″ y1=”160″ y2=”205″ ss=”0″ a=”0″ /><m x1=”12″
x2=”402″ y1=”219″ y2=”264″ ss=”0″ a=”0″ /><m x1=”8″ x2=”400″ y1=”277″ y2=”325″ ss=”0″ a=”0″
/><m x1=”11″ x2=”404″ y1=”331″ y2=”383″ ss=”0″ a=”0″ /><m x1=”9″ x2=”402″ y1=”392″ y2=”443″
ss=”0″ a=”0″ /><m x1=”522″ x2=”914″ y1=”49″ y2=”92″ ss=”1″ a=”0″ /><m x1=”525″ x2=”914″
y1=”106″ y2=”147″ ss=”1″ a=”0″ /><m x1=”519″ x2=”915″ y1=”159″ y2=”205″ ss=”1″ a=”0″ /><c
start=”4″ stop=”0″ /><c start=”3″ stop=”1″ /><c start=”0″ stop=”2″ /></map>
Applies the QOS policy to interface—service policy
Defines the PHB qos action for each of the different traffic classes—policy map
Defines the making parameters for classifying packets into service classes—class-map

Applies the QOS policy to interface–service policy
Defines the PHB qos action for each of the different traffic classes–policy map
Defines the making parameters for classifying packets into service classes–class-map