What is a valid HSRP virtual MAC address?

When a router undergoes the exchange protocol within OSPF, in what order does it pass through
each state?

What Netflow component can be applied to an interface to track IPv4 traffic?

What are three reasons to collect Netflow data on a company network? (Choose three.)

CORRECT TEXT

Attention: In practical examinations, please note the following, the actual information will prevail.
1. Name of the router is xxx
2. Enable secret password is xxx
3. Password In access user EXEC mode using the console is xxx
4. The password to allow telnet access to the router is xxx
5. IP information

CORRECT TEXT
Lab – Access List Simulation

A network associate is adding security to the configuration of the Corp1 router. The user on host C
should be able to use a web browser to access financial information from the Finance Web Server.
No other hosts from the LAN nor the Core should be able to use a web browser to access this server.
Since there are multiple resources for the corporation at this location including other resources on
the Finance Web Server, all other traffic should be allowed.
The task is to create and apply a numbered access-list with no more than three statements that will
allow ONLY host C web access to the Finance Web Server. No other hosts will have web access to the
Finance Web Server. All other traffic is permitted.
Access to the router CLI can be gained by clicking on the appropriate host. All passwords have been
temporarily set to “cisco”. The Core connection uses an IP address of 198.18.196.65
The computers in the Hosts LAN have been assigned addresses of 192.168.33.1 – 92.168.33.254
Host A 192.168.33.1 Host B 192.168.33.2 Host C 192.168.33.3 Host D 192.168.33.4
The servers in the Server LAN have been assigned addresses of 172.22.242.17 – 172.22.242.30 The
Finance Web Server is assigned an IP address of 172.22.242.23. The Public Web Server is assigned an
IP address of 172.22.242.17

CORRECT TEXT
A sporting goods manufacturer has decided to network three (3) locations to improve efficiency in
inventory control. The routers have been named to reflect the location: Boston, Frankfurt, and
Lancaster.
The necessary networking has been completed at each location, and the routers have been
configured with single area OSPF as the routing protocol. The Boston router was recently installed
but connectivity is not complete because of incomplete routing tables. Identify and correct any
problem you see in the configuration.
Note: The OSPF process must be configured to allow interfaces in specific subnets to participate in
the routing process.

CORRECT TEXT
A new switch is being added to the River Campus LAN. You will work to complete this process by first
configuring the building_2 switch with an IP address and default gateway. For the switch host
address, you should use the last available IP address on the management subnet. In addition, the
switch needs to be configured to be in the same VTP domain as the building_1 switch and also needs
to be configured as a VTP client. Assume that the IP configuration and VTP configuration on
building_1 are complete and correct. The configuration of the router is not accessible for this
exercise. You must accomplish the following tasks:
Determine and configure the IP host address of the new switch. Determine and configure the default
gateway of the new switch. Determine and configure the correct VTP domain name for the new
switch.
Configure the new switch as a VTP client.

CORRECT TEXT

A network associate is configuring a router for the weaver company to provide internet access. The
ISP has provided the company six public IP addresses of 198.18.184.105 198.18.184.110. The
company has 14 hosts that need to access the internet simultaneously. The hosts in the company
LAN have been assigned private space addresses in the range of 192.168.100.17 192.168.100.30.