what must you do to regain access via Cisco SDM?
You have applied a firewall configuration to your router using the Cisco Router and Security Device Manager (SDM) Firewall wizard. You find that you are now locked out and access via Cisco SDM is denied. After accessing the router via the console port, what must you do to regain access via Cisco SDM?
What is the result of the client-to-access-point association if the client SSID1 is left blank, and the SSID2
The network administrator has configured the SSID value in a wireless Cisco Aironet client card. What is the result of the client-to-access-point association if the client SSID1 is left blank, and the SSID2 is assigned a value of my_ssid?
Which device best supports all three functions?
A company needs to provide site-to-site VPN, remote access VPN, and firewall protection. Which device best supports all three functions?
what happens?
Refer to the exhibit. According to the error log, VLAN 1 is where the BPDU was received, and VLAN 2 is where the BPDU originated. When inconsistency is detected, what happens?
What is the mostly likely cause of this fault?
Refer to the exhibit. The tables contain information from the Cisco Router and Security Device Manager configurations of Router A and Router B. Traffic between Host 1 and Host 2 is not successfully establishing the site-to-site VPN between Router A and Router B.
What is the mostly likely cause of this fault?
What should you verify in the router configuration?
You are troubleshooting OSPF neighbor establishment problems, which are
occurring over Frame Relay interfaces that use the default OSPF network type. What should you verify in the router configuration?
Which statement is true about a Cisco Aironet 350 Series wireless client when its green LED appears to be off
Which statement is true about a Cisco Aironet 350 Series wireless client when its green LED appears to be off and its amber LED is blinking?
Which component of WPAv2 would limit the rollout because of the continued use of old access points?
The customer wants to implement wireless security through implementation of WPAv2. Which component of WPAv2 would limit the rollout because of the continued use of old access points?
What is needed to successfully complete this link?
A customer in Europe needs to establish an 11-Mbps wireless bridge link between two office buildings that are approximately 1.3 km apart. The wireless link will pass through a
public park, which contains a lake that is surrounded by trees. You run the range calculation and determine that the Cisco Aironet 1300 Series Outdoor Access Point/Bridge should work. You install the link using 10.5-dB yagis with 75 feet of standard Cisco cabling and both radios set at 20 mW. The wireless bridges are not able to establish or maintain a link.
What is needed to successfully complete this link?
which command or commands when attempting to resolve this problem?
Users logging into Cisco Router and Security Device Manager should be authenticated using the Cisco ISR local user database. Currently, none of the users can access Cisco Router and Security Device Manager via HTTP. You should check the configuration of which command or commands when attempting to resolve this problem?