which member is the standby machine?
CORRECT TEXT
Fill in the blank. In New Mode HA, the internal cluster IP VIP address is 10.4.8.3. The internal
interfaces on two members are 10.4.8.1 and 10.4.8.2 Internal host 10.4.8.108 pings 10.4.8.3, and
receives replies.
Review the ARP table from the internal Windows host 10.4.8.108. According to the output, which member is the standby machine?
what is the active cluster member’s IP address?
CORRECT TEXT
Fill in the blank. In New Mode HA, the internal cluster IP VIP address is 10.4.8.3. An internal host
10.4.8.108 successfully pings its Cluster and receives replies.
Review the ARP table from the internal Windows host 10.4.8.108. Based on this information, what
is the active cluster member’s IP address?
Review the exhibit and type the IP address of the member serving as the pivot machine in the space below.
CORRECT TEXT
Fill in the blank. In Load Sharing Unicast mode, the internal cluster IP address is 10.4.8.3. The
internal interfaces on two members are 10.4.8.1 and 10.4.8.2. Internal host 10.4.8.108 Pings
10.4.8.3, and receives replies. The following is the ARP table from the internal Windows host
10.4.8.108.
Review the exhibit and type the IP address of the member serving as the pivot machine in the space below.
CORRECT TEXT To stop acceleration on a GAiA Security Gateway, enter command:
CORRECT TEXT
To stop acceleration on a GAiA Security Gateway, enter command:
CORRECT TEXT To bind a NIC to a single processor when using CoreXL on GAiA, you would use the command
CORRECT TEXT
To bind a NIC to a single processor when using CoreXL on GAiA, you would use the command
To verify SecureXL statistics, you would use the command ________ .
CORRECT TEXT
Fill in the blank. To verify SecureXL statistics, you would use the command ________ .
To verify the SecureXL status, you would enter command _____________ .
CORRECT TEXT
Fill in the blank. To verify the SecureXL status, you would enter command _____________ .
To enter the router shell, use command __________ .
CORRECT TEXT
Fill in the blank. To enter the router shell, use command __________ .
To save your OSPF configuration in GAiA, enter the command ___________ .
CORRECT TEXT
Fill in the blank. To save your OSPF configuration in GAiA, enter the command ___________ .
To remove site-to-site IKE and IPSEC keys you would enter command ____ ___ and select the option to delete all
CORRECT TEXT
Fill in the blank. To remove site-to-site IKE and IPSEC keys you would enter command ____ ___
and select the option to delete all IKE and IPSec SA’s.