Your customer has an existing HP 3PAR F400 array with two controller nodes and eight DC3
disk enclosures. Each DC3 disk enclosure is fully populated with 300GB 15k disk drives. The
customer has purchased a new HP 3PAR StoreServ 7400 two-node system with five
additional drive enclosures to be installed in a second data center. This system is fully
populated with 450GB 10k drives Data will be migrated from the F400 to the 7400 by using
Remote Copy Fibre Channel (RCFC). The 7400 will then become the primary system, but
data will continue to be replicated between the systems. Additionally, the customer has
ordered extra 8GB/s FC adapters for the new 7400. During the installation you record these
serial numbers for the new HP 3PAR StoreServ system:
• HP serial number CZ32439658
• 3PAR serial number 1628580
Which SPID is assigned during the installation?

A.
SP0001628580

B.
SP32439658

C.
1628580

D.
00032439658

Explanation:

Reference:
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c03603825/c03603825.pdf
(page 7, second bullet)