A company has ArubaOS switches that are already configured to support the network. The company now wants to use Aruba AirWave to manage the switches. The network administrator creates a new group on Aruba AirWave, and then discovers several ArubaOS switches that should belong to this group. What is the best practice for the initial […]

Refer to the exhibit. The network consists of two ArubaOS switches with routing disabled. How should the network administrator configure the link between Switch A and Switch B to ensure that all hosts can communicate to all the other hosts within their respective VLANs? A. tagged for VLAN 20 and tagged for VLAN 30 B. […]

What is the relationship between a wireless client’s data rate and the throughput for the client’s traffic? A. The throughput is 90 percent of the data rate. B. The throughput is equal to the data rate multiplied by the connection time, minus the headers’ bytes. C. The throughput is less than the data rate and […]

Refer to the exhibit. All of the switches shown in the exhibit are ArubaOS switches. Where should the network administrator configure an IP helper address of 10.1.1.10? A. on VLAN 2 on Switch-1 B. on VLAN 2 on Switch-3 C. on VLAN 1 on Switch-1 D. on VLAN 1 on Switch-2

Refer to the exhibit. The network administrator wants to place contractor clients and employee clients in different broadcast domains. How should the administrator achieve this goal? A. Add a router in between Switch 1 and Switch 2. Configure a different subnet on each router interface. B. Create two MSTP instances on each switch. Assign ports […]

Refer to the exhibit. Originally, all four switches had the same region configuration. VLAN 14 was added to Switch_D and then mapped to instance 2. How does this affect the MSTP topology? A. Load sharing is lost, one of the uplinks is blocked for all traffic on Switch_C and Switch_D. B. Load sharing is lost, […]

How many operating system image files can a network administrator load on an ArubaOS switch? A. two B. three C. four D. unlimited

Refer to the exhibit. What should the network administrator do to permit Switch-1 to route traffic from a client in 10.1.11.0/24 to a client in 10.1.12.0/24? A. Enable proxy ARP. B. Enable IP routing. C. Configure a static route to 10.1.11.0/24 and a static route to 10.1.12.0/24. D. Enable OSPF routing on VLAN 11 and […]

Refer to the exhibit. A network administrator executes this command on an ArubaOS switch, Switch-2: Switch-2(config)# ip route 10.1.100.0/24 10.1.1.1 The administrator successfully pings Device 1 at 10.1.100.42 from Switch-2. However, Device 2 cannot ping Device 1. The administrator confirms that Device 1 is correctly set up. What should the administrator check on Switch-2 to […]

Refer to the exhibit. The network administrator enters this command: Switch# reload Which software and configuration file will load? A. software version KA.16.01 and config3 B. software version KA.15.15 and config2 C. software version KA.15.15 and config3 D. software version KA.16.01 and config1