Your customer is running HP Inform OS version 3.1.2 on their HP 3PAR StoreServ 7400. To
ensure there is no loss of access to the LUNs during an upgrade, they want to utilize the
NPIV feature. How can the customer accomplish this?

Your customer has an existing HP 3PAR F400 array with two controller nodes and eight DC3
disk enclosures Each DC3 disk enclosure is fully populated with 300GB 15k disk drives. The
customer has purchased a new HP 3PAR StoreServ 7400 two-node system with five

additional drive enclosures to be installed in a second data center. This system is fully
populated with 450GB 10k drives. Data will be migrated from the F400 to the 7400 by using
Remote Copy Fibre Channel (RCFC). The 7400 will then become the primary system, but
data will continue to be replicated between the systems. Additionally, the customer has
ordered extra 8GB/S FC adapters for the new 7400. What is the maximum number of
configurable host ports on the new HP StoreServ 7400 array in the customer environment?

You are installing an HP 3PAR StoreServ 7000 for your customer. They want to deploy a
physical Service Processor. When setting the Global LAN IP address via ETH0, which user
account is required to log in to the Service Processor?

Your customer has recently purchased an HP 3PAR StoreServ 7200 with two additional disk
enclosures. Each disk enclosure contains 24 disks. Their business requirement stipulates that
no data can be lost, even if an entire disk enclosure fails. You recommend that they use HA
Cage for their CPG availability. When creating the CPGs, which RAID levels should you
configure to meet the customer requirement (Select two.)

Your customer has an existing HP 3PAR F400 array with two controller nodes and eight DC3
disk enclosures. Each DC3 disk enclosure is fully populated with 300GB 15k disk drives. The
customer has purchased a new HP 3PAR StoreServ 7400 two-node system with five
additional drive enclosures to be installed in a second data center. This system is fully
populated with 450GB 10k drives Data will be migrated from the F400 to the 7400 by using
Remote Copy Fibre Channel (RCFC). The 7400 will then become the primary system, but
data will continue to be replicated between the systems. Additionally, the customer has
ordered extra 8GB/s FC adapters for the new 7400. During the installation you record these
serial numbers for the new HP 3PAR StoreServ system:
• HP serial number CZ32439658
• 3PAR serial number 1628580
Which SPID is assigned during the installation?

What must be done prior to running HP 3PAR SmartStart?

When replacing a defective disk drive in an HP 3PAR StoreServ system, which additional
task should you perform?

Beginning with the 3PAR Inform OS v 3.1.2, which license is no longer required for
autonomic system rebalancing after adding new resources?

You are designing a three-site solution for a customer. Two of the sites will have an HP
3PAR StoreServ 7400, and the remaining site will have an HP 3PAR StoreServ 7200.
Additionally, the solution must adhere to the following requirements:

* The customer requires copies of the data at all three sites.
* The business cannot tolerate the loss of any transactions
Which HP 3PAR Remote Copy Software configuration rule will affect the design of the
solution?

What is a requirement for using HP 3PAR SmartStart?