You are tuning a customer HP StoreOnce Backup System and notice they are running backups 20
hours a day. As a result, backup jobs are running during the same time as replication jobs. What
can you do to limit the available bandwidth and not saturate the link with replication traffic?

Your customer is migrating to VMware vSphere 5. Your solution includes HP 3PAR StoreServ
Storage with licenses for Remote Copy and sub-LUN tiering. The customer is interested in
implementing VMware Storage I/O Control and asks if there are any interoperability concerns with
your solution.
How does the inclusion of VMware Storage I/O Control impact your solution?

A customer with a B-Series fabric needs to establish FC-IP connectivity between their primary
data center fabric and DR data center fabric to enable replication. However, they are concerned
that fabric instability issues in the DR fabric will cause issues in their production fabric.
Which HP storage solution should you recommend?

A customer has an environment spanning two data centers in a campus environment. The primary
storage is an HP 3PAR StoreServ 10400 Storage System. Data is replicated between sites with an
RPO of zero. The customer is questioning whether they have adequate protection. You suggest
creating a DR site and actively replicate the data to it.
What are the implications of adding the third data center to the data network?

You are performing a demo of an HP StoreOnce 2620i Backup System solution in combination
with HP Data Protector. All best practice guidelines for the VTL and Data Protector have been
adhered to. However, you receive the following error when formatting a cartridge in a previouslycreated VTL.
[Normal] From: MMA@demo.local “Drive_Demo” Time: 4/23/2013 10:26:09 PM

Tape0:0:0:0C
Initializing new medium: “[4E94F289] 4E94F289”
[Major] From: MMA@demo.local “Drive_Demo” Time: 4/23/2013 10:26:10 PM [90:51]
Tape0:0:0:0C
Cannot write to device ([87] Wrong parameter.)
[Major] From: MMA@demo.local “Drive_Demo” Time: 4/23/2013 10:26:10 PM
Initialization of medium failed.
[Normal] From MMA@demo.local “Drive_Demo” Time: 4/23/2013 10:26:14 PM
Ejecting medium Tape0:0:0:0C”.
What must you do to perform a successful demo?

Your customer wants to replicate backup data from branch offices to a primary data center where
an HP StoreOnce 4430 Backup System using HP StoreOnce Catalyst is located. The main backup
application is HP Data Protector 7.01. The file and application servers have Windows 2003,
Windows 2008, and SUSE Linux 9 and 10 installed. The file and application servers are a mixture
of 32 and 64 bit Windows and Linux operating systems. As a long-term strategy, the customer
wants to migrate all services to the primary data center. No additional hardware can be purchased
for the branch offices, and complexity should be minimized.
Which deduplication type is optimal for this customer?

You are designing a storage solution for a customer concerned about storage availability during
code upgrades. Which HP 3PAR Port Persistence node identity handles host I/O requests, thus
providing greater resiliency during code upgrades?

The customer has two HP 3PAR StoreServ 7000 Storage systems split between two data centers.
Used capacity of each storage system is 10 TB of data. The replication between data centers is
performed via Ethernet/IP, and the replication technology used will be asynchronous. The
maximum RPO is 30 minutes, and the daily change rate of the customer data is a maximum of
0.5%, which is created evenly throughout the day.
What is the required minimum bandwidth between the data centers for replication?

A customer asks you to architect a new SAN fabric infrastructure comprised of redundant fabrics
for a test/dev server environment. They need to provide selective connectivity for array-based
snapshots from disk arrays hosted on the existing Cisco MDS 9506 Multilayer director-based
production fabric, to hosts on the test/dev fabric. A customer requirement is to utilize a different
vendor for the test/dev fabric. Which SAN technology enables the test/dev SAN fabric to maintain
interoperability between the two fabrics and meet the stated requirements?

During an HP customer assessment workshop, the Alinean report shown in the exhibit is created.
Which cost saving should you highlight in your presentation when positioning the value of HP
3PAR StoreServ Thin Technologies?