A host with two interfaces has the following routing table:

# netstat -rn

Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
——————- —————- ——- —– —– ——–
192.168.1.0 192.168.1.1 U 1 191 hme0 1
0.10.10.0 192.168.3.10 UG 1 0
192.168.3.0 192.168.3.1 U 1 176 qfe0
224.0.0.0 192.168.1.1 U 1 0 hme0
127.0.0.1 127.0.0.1 UH 1 3 lo0

What can be determined from the UG flags in the second line?

You want to configure the hme0 interface with an IPv6 address and the prefix fec0. Which two configurations achieve this? (Choose two.)

A Solaris system is configured with multiple interfaces connected to different networks. Which command enables this system to forward packets between these networks?

A host’s IPv6 link-local unicast address is based on the host’s Ethernet address. A 16-bit code is inserted in the 64-bit Interface ID portion of the IPv6 address to enable a 48-bit Ethernet address to become 64 bits in length. Which value represents this added 16-bit code?

An old router running the Solaris 10 OS is being reused as a normal
system. The second Ethernet interface is disabled and the administrator wants to disable in.routed
immediately and prevent in.routed from starting on the next boot. Which command needs to be
executed?

The administrator of a Solaris system that functions as a router wants to
modify the default configuration of the in.routed daemon. In which in.routed configuration file, should
the administrator modify the time interval in which Router Discovery Advertisements are transmitted?

You are an administrator for a large organization that uses a single registered Class B address range. Your organization contains a number of departments that range in size from 25 to 400 employees. Each department is to be given its own separate range of network addresses.

Which networking strategy efficiently uses the addresses allocated to your organization?

Which two are characteristics of the RDISC protocol on a Solaris 10 OS system? (Choose two.)

The system administrator needs to configure a static, default route to 192.168.0.1. The netmask is 255.255.255.240. Which two commands are used to ensure that the default route is installed immediately and at the next reboot? (Choose two.)

You have configured an IPv6 router that is having problems routing correctly to a default router connected to the Internet. You need to investigate the machine’s routing table and check that the default route is in place. You also need to check the neighbor cache to see whether the MAC address of the default router has been learned. Which two commands enable you to perform these tasks? (Choose two.)