Which of the following statements describe advantages of WAN Boot over a JumpStart installation?
Which of the following statements describe advantages of WAN Boot over a JumpStart installation? (Choose four.)
Which steps are required when configuring a DHCP server to support a PXE client?
When using the Preboot Execution Environment to boot and install the OS over the network on x86 / x64 based systems, there are a few parameters that need to be configured. To ensure that the client, when booted has all of the information it requires in order to boot successfully.
Which steps are required when configuring a DHCP server to support a PXE client? (Choose three.)
Which option is it?
This option, when used with the ifconfig command, makes the kernel communicate to the network interface and sets up the streams needed by IP to use the device. Which option is it?
Which four files need to be modified to change the name of this system from systemA to systemB?
You’ve just configured the network interface on systemA and the following information is displayed pertaining to systemA’s network interface:
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000
rtls0: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500 index 2 inet 192.168.1.31 netmask ffffff00 broadcast 192.168.1.255 ether 0:10:dc:a3:7e:4b
You’ve been instructed to change the name of this system to systemB. Which four files need to be modified to change the name of this system from systemA to systemB? (Choose four.)
Which service is it?
At boot up, this service calls the startup scripts which are used to configure each network interface with an IP address and other required network information. Which service is it?
Which script is it?
This startup script runs each time that the system is booted and configures each interface with an IP address and other required network information. Which script is it?
Which answer describes characteristics of the sparse root zone?
A Solaris zone can be configured with a sparse root zone. Which answer describes characteristics of the sparse root zone?
Which answer describes how to change the ZFS file system name from /files to /data?
Your x86-based system has a ZFS file system named /files on the c0d1 drive. You want to rename this file system, so that every time the system boots, it is automatically mounted under the name /data. Which answer describes how to change the ZFS file system name from /files to /data?
Which configuration will provide the best data protection in the event of a failure?
Your system has three disk drives allocated for data storage. You are using Solaris Volume Manager to create your file system on these drives. The application will be read-intensive. Which configuration will provide the best data protection in the event of a failure?
Select the answer that describes which steps you need to perform?
Due to increased demands that have been placed on your server, the swap space on this server is running low. You are going to add a swap file in the /datafile system as a temporary solution to add 500 Mbytes of additional swap space. Select the answer that describes which steps you need to perform?