Which file must be correctly configured on the system with the tape devices attached to enable
A server has not had any changes made to the configuration of the standard system login accounts. It has a number of tape devices attached to it. The server is the only system on the local network that has tape devices. A file must be configured to allow remote backups.
Which file must be correctly configured on the system with the tape devices attached to enable the other system to successfully perform its backup?
Which FORTH Monitor command creates a new permanent device alias called S10disk?
You are the system administrator and the IT manager asks you to attach a new boot disk to a SPARC-based development system. This allows the server to have both a Solaris 9 OS system disk and a Solaris 10 OS system disk.
You bring the system to run level 0 and attach a single external SCSI disk to the workstation. After power cycling the workstation to the ok prompt, the new disk is presented as /pci@1f,0/pci@1/pci@1/SUNW,isptwo@4/sd2,0.
Which FORTH Monitor command creates a new permanent device alias called S10disk?
Which command or command sequence shifts the pending jobs from printer1 to printer2…
The printer1 printer has malfunctioned and it will be some time before it can be repaired. Another printer, printer2, is available and functional.
Which command or command sequence shifts the pending jobs from printer1 to printer2, and leaves the queue for printer1 to reject requests?
which of the following are required?
When using the Preboot Execution Environment to boot and install the OS over the network on x86 / x64 based systems, which of the following are required? (Choose three.)
Which option specifies that this x86 system is a DHCP client?
You need to register your x86-based system on a JumpStart server. Which option specifies that
this x86 system is a DHCP client?
What is this information used for?
You registered an x86-based client with the JumpStart server and the following information was displayed on the screen:
/etc/dfs/dfstab
copying boot file to /tftpboot/pxegrub.I86PC. Solaris_10-1
If not already configured, enable PXE boot by creating a macro named 0100E0815BA60E with:
Boot server IP (BootSrvA) : 10.1.1.6
Boot file (BootFile) : 0100E0815BA60E #
What is this information used for? (Choose two.)
Which of the following provides the JumpStart client with the location of the system identification file?
Which of the following provides the JumpStart client with the location of the system identification file? (Choose two.)
Which of the following are valid sources from which JumpStart clients can obtain identification information?
Which of the following are valid sources from which JumpStart clients can obtain identification information? (Choose three.)
What information can be supplied by the configuration server?
For a Custom JumpStart installation, the configuration server specifies how the Solaris Operating System installation proceeds on the JumpStart client. What information can be supplied by the configuration server? (Choose three.)
Which answers describe system identification information that can be obtained from the identification service
You are installing a SPARC system using a custom jumpstart installation. You want to automate the installation as much as possible and would like to avoid answering questions normally presented during the system identification phase of the installation. You choose to perform a Custom JumpStart installation.
Which answers describe system identification information that can be obtained from the identification service provided by the boot-server? (Choose three.)