Which two modes support using SnapMirror over multiple network paths?
A.
Standalone
B.
Partner
C.
Multi
D.
Failover
E.
Give back
Explanation:
https://library.netapp.com/ecmdocs/ECMP1196991/html/GUID-75BD4540-A103-4E2B-8B0AE6BBC0D3F43F.html
http://backdrift.org/man/netapp/man5/na_snapmirror.conf.5.html
Two multipath methods are supported:
The multiplexing mode causes snapmirror to use both paths at the same time. If one should fail, it will switch
to use the remaining path only and use both again should the failing path be repaired.
Failover mode causes snapmirror to use the first path as the desired path and only use the second path should
problems arise with the first path.