DRAG DROP
Your network contains four servers that run WindowsServer 2012 R2.
Each server has the Failover Clustering feature installed. Each server has three network adapters installed. An
iSCSI SAN is available on the network.
You create a failover cluster named Cluster1. You add the servers to the cluster.
You plan to configure the network settings of each server node as shown in the following table.
You need to configure the network settings for Cluster1.
What should you do?
To answer, drag the appropriate network communication setting to the correct cluster network or networks.
Each network communication setting may be used once, more than once, or not at all. You may need to drag
the split bar between panes or scroll to view content.
Answer: NIC1: do not allow, NIC2: allow, NIC3: allow
Explanation:
http://technet.microsoft.com/en-us/library/cc725775.aspx
Allow cluster network communication on this network- If you select this option and you want the network to be
used by the nodes only (not clients), clear “Allow clients to connect through this network”. Otherwise, make sure
it is selected.
Do not allow cluster network communication on this network – Select this option if you are using a network only
for iSCSI (communication with storage) or only for backup. (These are among the most common reasons for
selecting this option.)
