Your network contains a server named Server1 that runs Windows Server 2008 R2. The network for Server1 is configured as shown in the table.
You plan to deploy DirectAccess on Server1. You need to configure the network interfaces on Server1 to support DirectAccess. What should you do?
A.
Add the IP address of 10.1.2.2 to LAN1.
B.
Remove the IP address of 131.107.1.13 from Internet2, and then add the address to LAN1.
C.
Remove the IP of address 131.107.1.13 from Internet2, and then add the address to Internet1.
D.
Add the default gateway of 131.107.1.1 to Internet2.
I don’t understand this, at all.
0
0
Correct is D
0
0
BranchCache need to consecutive public IPs to be assigned to an interface: http://technet.microsoft.com/library/ee382264(v=ws.10).aspx
nothing to understand logically – it is a requirement for the moment from the way it is implemented.
0
0
I wanted to say Direct Access…
0
0
Just passed exam with 875. answer is C. Link from Dan sheds some light. If you don’t understand what the link is talking about then you need to start at the beginning with DirectAccess.
0
0