PrepAway - Latest Free Exam Questions & Answers

What should you identify?

You have a Hyper-V host named server1 that runs windows server 2012 R2.server1 host 50 virtual
machines that run windows server 2012 R2
You enable and configure enhanced session mode on Server1.
You need to identify a new functionality available for the virtual machines hosted on server1.
What should you identify?

PrepAway - Latest Free Exam Questions & Answers

A.
Smart card authentication using virtual machine connections

B.
Redirection of RemoteFX USB drivers by using remote desktop connections

C.
Redirection of RemoteFX USB drivers using virtual machine connections

D.
smart card authentication using the remote desktop client.

29 Comments on “What should you identify?”

  3. Nikita says:

    I did not have much time. Have passed today.
    The dump includes V4 – google …
    Exam collections first (kat) and annette helped me.
    Now v5 is still valid… but check v4 too 😉
    maybe 10-20 answers here in v5 are incorrect.

    only two new questions on exam – similar to questions here with adds cmdlets.
    If you really remember the answers here… to pass is not a problem 😉

    Good luck and thanks to all.




    1



    0
      1. neil says:

        It is questioning a new functionality. Since the smart card is not a brand new technology, why not RemoteFX USB Redirection? The link you provided also talking about it is a new feature.




        0



        0
  5. Dejan says:

    Maybe B)

    http://www.virtualizationadmin.com/articles-tutorials/microsoft-hyper-v-articles/management/using-virtual-machine-connection-and-enhanced-session-mode-windows-server-2012-r2.html

    In order to implement USB device redirection through Virtual Machine Connection, you need to perform an additional configuration step. Using the Group Policy management tool on the client computer, enable the Allow RDP redirection of other supported RemoteFX USB devices from computer group policy. You can find this policy under Administrative Templates->Windows Components->Remote Desktop Services->RemoteFX USB Device Redirection. After enabling the policy, use the GPUPDATE /FORCE command to apply this change on the client, and then reboot it. Figure 10 shows the Local Resources dialog for a virtual machine for which USB device redirection has been enabled.




    0



    0
  7. BedfordDiego says:

    Passed today with 900 points. Most of questions from this dump, some from v.4 and some from examcollection (Kathleen and Maya dumps). Almost all questions from comments under Q286 in v.4 – so make sure you check that!
    Got only 2 new questions – one was about converting DHCPv.4 leases into reservations (what do you need to do that in PS) the second one I don’t remember.
    Thanks for all the comments and answers. Peace!




    0



    0
  8. pete says:

    Enhanced session mode
    Virtual Machine Connection in Hyper-V now allows redirection of local resources in a Virtual Machine Connection session.

    What value does this change add?
    Virtual Machine Connection enhances the interactive session experience provided for Hyper-V administrators who want to connect to their virtual machines. It provides functionality that is similar to a remote desktop connection when you are interacting with a virtual machine.
    In previous versions of Hyper-V, Virtual Machine Connection provided redirection of only the virtual machine screen, keyboard, and mouse with limited copy functionality. To get additional redirection abilities, a remote desktop connection to the virtual machine could be initiated, but this required a network path to the virtual machine.

    The following local resources can be redirected when using Virtual Machine Connection.
    Display configuration
    Audio
    Printers
    Clipboard
    Smart cards
    Drives
    USB devices
    Supported Plug and Play devices

    So which option is correct A or C?




    0



    0
  10. Cribb says:

    Just took this and passed……not by much….but passed. Mostly used this site. If I questioned an answer I read what others said on here….looked at other versions on this site etc.




    0



    0
  12. shawn says:

    Hi Anyone has the answer to this?
    Your network contains 10 subnets. Each subnet contains 10 servers that run Windows Server 2012 R2.

    You plan to assign IPv6 addresses to all of the servers. The solution must ensure that the servers can connect

    to other servers in remote subnets. The IPv6 addresses will not be routed on the Internet.

    You need to identify a valid prefix to use for the IPv6 addresses.

    Which prefix should you identify?

    A. 3ffe::

    B. Fd5a::

    C.0200::

    D.::




    0



    0
    1. Josh says:

      I think this should be B.Fd5a
      As question states “The IPv6 addresses will not be routed on the Internet” means address MUST be private, and only IPv6 with prefix FC and FD are private addresses.
      Any other idea?




      1



      0
  13. shawn says:

    You have a server named Serverl that runs Windows Server 2012 R2.

    Server1 contains a volume named Data. Data contains a shared folder named Share1 that contains shared

    files. Several users access the files.

    You enable shadow copies on the Data volume.

    A user named User1 deletes a file named Budget.xls frorn Share1. You need to recover the file. The solution

    must not override changes to the other files in Share1.

    What should you do first?

    A. From the properties of the Data volume, open the Previous Versions tab, and then open the folder. Browse

    to the Share1 folder.

    B. From the properties of the Data volume, open the Shadow Copies tab, select the shadow copy, and then

    click Revert.

    C.From the properties of the Share1 folder, open the Sharing tab, click Advanced Sharing, and then click

    Caching.

    D.From the properties of the Share1 folder, open the Previous Versions tab, and then click Restore.

    Answer :A??? maybe




    0



    0
  14. shawn says:

    Hi All
    Took the exam today and pass with 916.
    one month back ago I was stress out looking for studies alternative when Test king cheat me out of my purchased dump. I am a believer of exam dump with the emphasize that at the end of the day you still need to know your stuff and gain the knowledge to deliver your job in the real world. Been supportive because I understand that the expectation of exam question and answer are usually very different apart from what you have already gained on job. Even you have been doing this for 20 years, it doesnt mean you will pass the exam
    I didn’t want to take the certification exam ever since getting NT4 paper and going into the endless loop of certification re test. I was been make to do it. Given a choice I would rather have choose to learn at a slower pace in my working environment.

    To give back to the community, almost all the questions are here in this version. I got question about link and unlink OU, adding user to group 1,2 3 question, question that I have posted above about shadow copied enable and you need to recover deleted files, RODC question on IFM, create users in default UPN litwareinc.com, transfer schema master role to another domain controller before you can remove active directory from DC1, question on need to ensure that all users in contoso.com are replicated to the new domain controller on azure

    do take note that the below question has been switch

    Server 1– Contoso.com– domain
    Server 2– workgroup– public

    has been change the other way around

    server 1–workgroup–public
    server 2– contoso.com–domain
    So just remembering the answer will not get you anyway. you still need to understand why it that answer. google help in many ways

    There is a new question with a drop down that you have choose between default domain controller policy and default domain policy
    I can only remember the question as such
    lifetime of service ticket— default domain policy
    user permission– default domain controller policy
    disallow authenticate users to configure computer to logon to the domain— default domain policy

    Thank you everyone that has contribute to the community, till next year for the last paper. Merry Xmas everyone!




    2



    0
  15. Calin says:

    You have a DNS server named DNS1 that runs windows server 2012 R2.

    DNS1 is used to resolve the names of internet resources by using several DNS forwarders.

    You need to prevent DNS1 from performing iterative queries if the DNS forwarders are unable to reslove the queries.

    Which cmdlet should you use?

    A.Remove-DNSServerRootHint
    B.Set-DNSServerPrimaryZone
    C.Ser-DNSServerGlobalNameZone
    D.Unregister-DNSserverDrirectoryPartition

    the resplonse should be:
    Set-DnsServerForwarder -> https://technet.microsoft.com/en-us/library/jj649887.aspx
    By default, a DNS server performs iterative queries when it cannot resolve a query.

    what is microsoft whants?




    0



    0
  17. mist74 says:

    Ok. Passed. From the hot head two new questions. Their are memory dumps. Questions are in 100% well memorised. Unfortunately answers aren’t,they accuracy are only 70%, maybe I have forgotten some options then especially in the first one.
    Enjoy and GL for everybody.

    1. Your network contains one Active Directory forest named contoso.com. The forest contains one domain.All domain controlers run Windows Server 2012 R2.
    The domain contains an OU named GROUPS that contains a global security group named MarketingUsers.

    You run the following command from Windows PowerShell:
    $groupInstance = get-ADGroup -identity”MarketingUsers”
    New-ADGroup -name “FinanceUsers” -instance $groupInstance -GroupScope universal

    Use the drop-down menus to to select the answers that completes each statement.

    – A new group named FinanceUsers will be created in:
    [default location, the Groups OU, Users folder]
    – The FinanceUsers group will be created as a:
    [global security group, universal security group, local distribution group]

    2. Your network contains one Active Directory forest named contoso.com. The forest contains one domain.All domain controlers run Windows Server 2012 R2. Using Windows Firewall you must prevent remotely logged account named Administrator to respond for Remote Assistance request.
    What criteria will have the rule you have to construct? Pick the corest one from drop lists.




    0



    0
  18. Wader says:

    Passed in Russia, on last week. Score 9xx
    I Use 70-410 (v.5) only, read the comment to qestion, some answer incorrect.
    Explore explanations for difficult questions for you.




    0



    0
  19. Randy says:

    Passed in the beginning of January 2016 with a score in the mid-900’s. Pretty much all questions are listed verbatim in version 5. I got 4 questions about RODC and used th answers provided by Jony. Two questions about Azure. Some questions were the same concept, but worded slightly different so pay attention to the subtle differences…it changes the answer. Right now if you heavily memorize version 5, your score is guaranteed to be atleast an 850. Note that some of the answers on the site are very wrong, so read the comments on each question to find the correct answer. If there are no comments, chances are that the provided answer is correct.




    0



    0
  20. Norberto says:

    Passed Yesterday 871 this dump is the most valid I found so far… I think all questions were either here and in the v4 version…
    (Pay attention to the comments on the questions)




    0



    0
  21. Karl says:

    Passed! 9xx

    Study hard and read this dump. The dump is still valid but you must read comments!!!!
    I’ve find 4-5 new question but rember just one about creation of reverse ptr. This is the right sintax:
    cmd for PTR Record creation of server1.contoso.com (192.168.0.111)
    dnscmd(*) dnsserver.contoso.com /RecordAdd 0.168.192(*).in-addr.arpa 111 PTR server.contoso.com(*)

    (*)= right choose

    good luck and thank you all




    0



    0

Leave a Reply