You plan to deliver 100 client computers to a customer. The computers will run Windows 10. All of the computers support only Unified Extensible Firmware Interface
(UEFI) Class 2.
You need to enable Secure Boot for the computers.
Which UEFI settings on the computers should you modify?

You have several reference computers. The computers are configured to always start from a local hard disk drive.
You plan to capture the reference computers.
On each reference computer, you connect a USB flash drive (UFD) that contains an installation of Windows Preinstallation Environment (Windows PE).
You need to ensure that the reference computers start automatically by using Windows PE from the UFD.
What should you do?

You plan to deploy operating systems to several servers. The servers have RAID controllers.
You plan to install three hard disks on each server.
You need to configure the servers to meet the following requirements:
Ensure that all data will be available if a single disk fails.
Provide the highest amount of disk space to store files.
Which RAID level should you configure on the servers?

You have a server named Server1 that runs Windows Server 2012 and has the Windows Deployment Services server role installed.
You need to use a capture image to create an image of a reference computer.
What should you add to Server1 before creating the capture image?

You start a computer named Computer1 from Windows Preinstallation Environment (Windows PE).

You discover that you cannot access the network because the driver for the network card is not included in Windows PE.
You obtain a valid network driver for Computer1.
You need to ensure that you can access the network from Computer1 immediately.
What should you do?

You have several servers that have the following hardware installed:
A network card
2 GB of physical memory
A 100-GB hard disk drive
A x86 processor and mother board
You plan to install Windows Server 2012 on the servers.
You need to identify which hardware component must be replaced before the planned installation.
Which hardware component should you identify?

You have a custom managed application that you plan to use from Windows Preinstallation Environment (Windows PE). The application requires the Microsoft .NET
Framework.
You need to configure Windows PE to support the application.
Which two packages should you add to Windows PE? (Each correct answer presents part of the solution. Choose two.)

You have a client computer that runs Windows 10 and has the Windows Assessment and Deployment Kit (Windows ADK) installed.
You need to create a Windows Preinstallation Environment (Windows PE) build environment.
Which command should you use?

Your company’s deployment environment contains the following:
One subnet
One Active Directory domain
Two servers that run Windows Server 2012
You need to recommend a solution to deploy an image to at least 100 client computers simultaneously.
The solution must start deploying the image automatically when 20 client computers are available to receive the image.
What should you include in the recommendation?

Your company plans to implement a deployment environment.
The company identifies the following requirements for the planned implementation:
Install multiple computers simultaneously.
Use the least amount of network traffic to deploy images.
Automatically start each deployment only when 10 computers are ready for installation.
Ensure that all customers accept the End-User License Agreement (EULA) the first time they start their computer.
A manager at the company recommends deploying generalized images by using Windows Deployment Services (WDS) configured for unicast deployment.
You need to identify which requirements the recommendation meets.
Which two requirements should you identify? (Each correct answer presents part of the solution. Choose two.)