Your network contains the servers configured as shown in the following table.

Your company is assigned the public IP addresses from 131.107.0.1 to 131.107.0.31. You need to ensure that Web1 is accessible from the Internet by using https://131.107.0.2. What should you do from the Routing and Remote Access console?

Your network contains a server named Server1 that has the Routing role service installed. Server1 has two network connections. One network connection connects to the internal network. The other network connection connects to the Internet.

All network connections connected to the internal network use private IP addresses. You install a Web server named Web1. Web1 hosts a secured Web site that only allows connections over TCP port 8281. Web1 is connected to the internal network. You need to ensure that the secure Web site can be accessed from the Internet. What should you do from the Routing and Remote Access console?

Your network contains two offices named Office1 and Office2. The offices connect to each other by using a demand-dial connection.

You add a new subnet in Office2.

You need to ensure that a demand-dial connection starts when users attempt to connect to resources in the new Office2 subnet.

What should you do from the Remote Routing and Access console?

Your network contains a server named Server1. Server1 runs Windows Server 2008 R2 and has a single network connection. The connection is configured to use a default gateway address of 10.0.0.1. The default gateway has a metric value of 100. You configure a second default gateway that uses an address of 10.0.0.2. You need to ensure that 10.0.0.2 is only used as the default gateway if 10.0.0.1 is unreachable.

What should you do?

Your network contains a DHCP server that is configured as shown in the exhibit. (Refer to the Exhibit.)

You need to ensure that the DHCP server can respond to DHCP clients. What should you do?

Your network contains two DHCP servers named Server1 and Server2. Server1 and Server2 are located in the same subnet.

You configure a split scope named Scope1 on the DHCP servers. You need to ensure that Server2 only responds to DHCP client requests if Server1 is unavailable.

What should you modify?

Your network contains an Active Directory domain. The domain contains a DHCP server named Server1. You create a scope named Scope1 on Server1.

You need to prevent unauthorized DHCP clients from receiving addresses from Server1. What should you do?

You need to add a reservation for a print device to a DHCP scope. Which two components should you include in the reservation? (Each correct answer presents part of the solution. Choose two.)

Your network contains two DHCP servers named Server1 and Server2. On Server1, you create a scope named Scope1.

You need to ensure that DHCP clients receive IP addresses from the address range in Scope1 if Server1 is unavailable. The solution must prevent both servers from assigning duplicate IP addresses.

What should you do from the DHCP console?

Your network contains a single Active Directory domain. All servers run Windows Server 2008 R2.

You have an IPv6-only infrastructure that has multiple subnets. You deploy a new server named Server1.

You need to ensure that Server1 can communicate with the client computers in all of the internal subnets. The solution must use an address that is reserved for internal networks.

Which address should you assign?