You need to ensure that the users who migrated to fabrikam.com can continue to access shared resources in cont
Note: This questions is part of series of questions that use the same or similar answer choices.
An answer choice may be correct for more than one question in the series.
Each question is independent of the other questions in this series.
Information and details provided in a question apply only to that question.
Your network contains one Active Directory forest named contoso.com.
The forest contains two child domains and six domain controllers.
The domain controllers are configured as shown in the following table.
You have a trust from contoo.com to another forest named fabrikam.com.
You plan to migrate users from contodo.com to fabrikam.com.
You need to ensure that the users who migrated to fabrikam.com can continue to access shared
resources in contoso.com. the solution must not require administrators to modify permissions to
shared resources.
What should you use?
What command should you run?
Your network contains one Active Directory forest named adatum.com.
The forest contains a single domain.
The site topology for the forest is shown in the exhibit.
Each site contain s one domain controller.
You need to ensure that replication between site2 and site4 occurs in 15 minutes or less.
What command should you run? To answer select the appropriate options in the answer area.
Answer Area
New-AdReplicationSiteLink
New-ADReplicationLinkBridge
Set-ADReplicationConnection
Set-ADReplicationSiteLink
Set-ADReplicationSiteLinkBridge
-name
SiteLink3
SiteLink6
SiteLink1, SiteLink2
-SitesIncluded Site2, Site4 -ReplicationFrequencyinMinutes 15 -cost
You need to reduce the amount of time it takes to replicate Active Directory changes between DC1 and DC3
Your network contains one Active Directory forest named contoso.com.
The forest contains a single domain.
The domain contains the domain controllers is configured as shown in the following table.
Name Site
DC1 Site1
DC2 Site2
DC3 Site3
DC4 Site4
The replication topology is configured as shown in the following output.
Cost : 100
DistinguishedName : CN=SiteLink1, CN=IP, CN=Inter-Site Transports,
CN=Sites, CN=Configuration, Dc=Adatum, DC=com
Name : SiteLink1
ObjectClass : SiteLink
ObjectGUID : e1c8c335-b75f-4612-8a9e-58a0edead21f
ReplInterval : 60
SiteList : {CN=Site4, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum,
DC=com,
CN=Site2, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum, DC=com}
Cost : 100
DistinguishedName : CN=SiteLink1, CN=IP, CN=Inter-Site Transports,
CN=Sites, CN=Configuration, Dc=Adatum, DC=com
Name : SiteLink2
ObjectClass :SiteLink
ObjectGUID : 9516948e-cd56-4a9b-b6ba-cdf3dd7fe0d1
ReplInterval : 60
SiteList : {CN=Site4, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum,
DC=com,
CN=Site2, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum, DC=com}
Cost : 100
DistinguishedName : CN=SiteLink3, CN=IP, CN=Inter-Site Transports,
CN=Sites, CN=Configuration, Dc=Adatum, DC=com
Name : SiteLink3
ObjectClass : SiteLink
ObjectGUID : 07a7a37e-a12c-40c4-8042-f5d2e737b8a9
ReplInterval : 60
SiteList : {CN=Site4, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum,
DC=com,
CN=Site3, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum, DC=com}
Cost : 400
DistinguishedName : CN=SiteLink4, CN=IP, CN=Inter-Site Transports,
CN=Sites, CN=Configuration, Dc=Adatum, DC=com
Name : SiteLink4
ObjectClass : SiteLink
ObjectGUID : 508810dc-30fd-4845-982a-d4552fba2e04 ReplInterval : 45
SiteList : {CN=Site4, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum,
DC=com,
CN=Site2, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum, DC=com}
You discover that replication between Dc1 and DC3 takes a few hours.
You need to reduce the amount of time it takes to replicate Active Directory changes between
DC1 and DC3.
What should you do?
Which cmdlet should you run?
You have a server named Server1 that runs Windows Server 2012 R2 and uses Windows Server
Backup.
You need to identify whether the backups performed on Server1 support bare metal recovery.
Which cmdlet should you run?
Use the drop down menus to select the answer choice that complete each statement.
Your network contains one Active Directory forest named contoso.com.
The forest contains a single domain.
The domain contains the domain controllers is configured as shown in the following table.
Name Site
DC1 Site1
DC2 Site2
DC3 Site3
DC4 Site4
The forest contains a member server named Server1.
Server1 has an IP address of 172.16.10.66.
The forest has the following Active Directory subnet configuration.
DistinguishedName : CN=172.16.10.0/26, CN=subnets, CN=Sites,
CN=Configuration,
Location Dc=Adatum, DC=com
Name : 172.16.10.0/26
ObjectClass : subnet
ObjectGUID : db362a6c-c0a9-4703-aaee-191083ab9ea5
Site : CN=Site1, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum,
DC=com,
DistinguishedName : CN=172.16.10.64/26, CN=subnets, CN=Sites,
CN=Configuration,
Location Dc=Adatum, DC=com
Name : 172.16.10.64/26
ObjectClass : subnet
ObjectGUID : ef101558-3afa-41f1-9c5a-717453436fc1
Site : CN=Site2, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum,
DC=com,
DistinguishedName : CN=172.16.10.192/26, CN=subnets, CN=Sites,
CN=Configuration,
Location Dc=Adatum, DC=com
Name : 172.16.10.192/26
ObjectClass : subnet
ObjectGUID : 33137047-6711-4195-940f-a463bbdab8fb
Site : CN=Site4, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum,
DC=com,
DistinguishedName : CN=172.16.10.128/26, CN=subnets, CN=Sites,
CN=Configuration,
Location Dc=Adatum, DC=com
Name : 172.16.10.128/26
ObjectClass : subnet
ObjectGUID : ef5235ab-759b-4dc8-992a-c5ec1dae97a8
Site : CN=Site3, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum,
DC=com,
Use the drop down menus to select the answer choice that complete each statement.
Answer Area
If you promote Server1 to a domain controller, its server object will be created in [answer area]
Site1
Site2
Site3
Site4
If you perform an Active Directory search from a domain member that has an IP address of
172.16.10.116, you will attempt to connect [answer area]
DC1
DC2
DC3
DC4
Which cmdlet should you run?
You have a cluster named Cluster1 that contains two nodes. Both nodes run Windows Server
2012 R2. Cluster1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2.
You notice that VM1 is marked as being in a critical state in the cluster.
You verify that VM1 is functioning correctly.
You need to ensure that VM1 is no longer marked as being in a critical state.
Which cmdlet should you run?
What should you configure in Group Policy?
You network contains one Active Directory domain named adatum.com.
The domain contains a DNS server named Server1 that runs Windows Server 2012 R2.
All domain computers use Server1 for DNS.
You sign adatum.com by using DNSSEC.
You need to configure the domain computers to validate DNS responses for adatum.com records.
What should you configure in Group Policy?
You need to add an additional UPN Suffix
Note: This questions is part of series of questions that use the same or similar answer choices.
An answer choice may be correct for more than one question in the series.
Each question is independent of the other questions in this series.
Information and details provided in a question apply only to that question.
Your network contains one Active Directory forest named contoso.com.
The forest contains two child domains and six domain controllers.
The domain controllers are configured as shown in the following table.
You need to add an additional UPN Suffix.
What should you use?
You need to replicate users who haven’t authenticated against any domain controllers for the last 7 days
Note: This questions is part of series of questions that use the same or similar answer choices.
An answer choice may be correct for more than one question in the series.
Each question is independent of the other questions in this series.
Information and details provided in a question apply only to that question.
Your network contains one Active Directory forest named contoso.com.
The forest contains two child domains and six domain controllers.
The domain controllers are configured as shown in the following table.
You need to replicate users who haven’t authenticated against any domain controllers for the last
7 days.
What should you use?
You need to enable universal group membership caching for the Europe office and Asia office sites
Note: This questions is part of series of questions that use the same or similar answer choices.
An answer choice may be correct for more than one question in the series.
Each question is independent of the other questions in this series.
Information and details provided in a question apply only to that question.
Your network contains one Active Directory forest named contoso.com.
The forest contains two child domains and six domain controllers.
The domain controllers are configured as shown in the following table.
You need to enable universal group membership caching for the Europe office and Asia office
sites.
What should you use?