Which cmdlet should you use?
Note: This Question is part of series of question that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in the series. Information and detailed provided in a question apply only to that question.
You network contains one Active Directory domain named contoso.com. The forest functional level is Windows Server 2012. All servers run Windows Server 2012 R2. All client computer run Windows 8.1.
The domain contains 10 domain controllers and a read-only domain controller (RODC) named RODC01. All domain controllers and RODCs are hosted on a Hyper-V host that runs Windows Server 2012 R2.
You need to identify which user accounts were authenticated by RODC1.
Which cmdlet should you use?
You need to prevent administrators from accidently deleting any of the site in the forest
Your network contains one Active Directory forest named contoso.com. the forest contains two child domains and six domain controllers. The domain controllers are configured as shown in the following table.
Name Domain Site
DC1 Contoso.com Main Office
DC2 Contoso.com Main Office
DC3 Contoso.com Europe Office
DC4 Contoso.com Asia Office
DC5 Sales.contoso.com Main Office
DC6 Manufacturiung.contoso.com Main Office
You need to prevent administrators from accidently deleting any of the site in the forest.
What should you use?
What should you identify?
Your Company is testing DirectAccess on Windows Server 2012 R2.
Users report that when they connect to the corporate network by using DirectAccess, access to Internet websites and Internet hosts is slow. The users report that when they disconnect from DirectAccess, acces to the internet websites and the internet hosts is much faster.
You need to identify the most likely cause of the performance issue.
What should you identify?
What should you use?
Your network contains one Active Directory forest named contoso.com. the forest contains two child domains and six domain controllers. The domain controllers are configured as shown in the following table.
Name Domain Site
DC1 Contoso.com Main Office
DC2 Contoso.com Main Office
DC3 Contoso.com Europe Office
DC4 Contoso.com Asia Office
DC5 Sales.contoso.com Main Office
DC6 Manufacturiung.contoso.com Main Office
You need ensure that all Active Directory changes are replicated to all of the domain controllers in the forest within 30 minutes.
What should you use?
Which cmdlet should you run first?
Your network contains one Active Directory domain named contoso.com. The domain contains a file server named Server01 that runs Windows Server 2012 R2. Server01 has an operating system drive and a data drive. Server01 has a trusted Platform Module (TPM).
Which cmdlet should you run first?
You need to ensure that the users who migrated to fabrikam.com can continue to access shared resources in cont
Your network contains one Active Directory forest named contoso.com. the forest contains two child domains and six domain controllers. The domain controllers are configured as shown in the following table.
Name Domain Site
DC1 Contoso.com Main Office
DC2 Contoso.com Main Office
DC3 Contoso.com Europe Office
DC4 Contoso.com Asia Office
DC5 Sales.contoso.com Main Office
DC6 Manufacturiung.contoso.com Main Office
You have a trust from contoo.com to another forest named fabrikam.com.
You plan to migrate users from contodo.com to fabrikam.com.
You need to ensure that the users who migrated to fabrikam.com can continue to access shared resources in contoso.com. the solution must not require administrators to modify permissions to shared resources.
What should you use?
You need to create a Managed service Account
You have the following Windows PowerShell output.
PS C:\Users\Administrator> New-AdServiceAccount service01 –DNSHostName service01.contoso.com New-ADServiceAccount : Key does not exist
At line : 1 char : 1
+ New-ADServicAccount service01
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: {CN=service01,CN… =contoso,DC=com:String} [New-ADServiceAccount], ADException
+FullyQualifiedErrorId :
ActiveDirectoryserver : -2146893811,Microsoft. ActiveDirectory . Management . Commands . NewADServiceAccount
You need to create a Managed service Account.
What should you do?
What command should you run?
your network contains one Active Directory forest named adatum.com. The forest contains a single domain.
The site topology for the forest is shown in the exhibit.
Each site contain s one domain controller.
You need to ensure that replication between site2 and site4 occurs in 15 minutes or less.
What command should you run? To answer select the appropriate options in the answer area.
Answer Area
New-AdReplicationSiteLink
New-ADReplicationLinkBridge
Set-ADReplicationConnection
Set-ADReplicationSiteLink
Set-ADReplicationSiteLinkBridge
-name
SiteLink3
SiteLink6
SiteLink1, SiteLink2
-SitesIncluded Site2, Site4
–ReplicationFrequencyinMinutes 15
–Cost
70
110
400
You need to reduce the amount of time it takes to replicate Active Directory changes between DC1 and DC3
Your network contains one Active Directory forest named contoso.com. The forest contains a single domain. The domain contains the domain controllers is configured as shown in the following table.
Name Site
DC1 Site1
DC2 Site2
DC3 Site3
DC4 Site4
The replication topology is configured as shown in the following output.
Cost : 100
DistinguishedName : CN=SiteLink1, CN=IP, CN=Inter-Site Transports, CN=Sites, CN=Configuration, Dc=Adatum, DC=com
Name : SiteLink1
ObjectClass : SiteLink
ObjectGUID : e1c8c335-b75f-4612-8a9e-58a0edead21f
ReplInterval : 60
SiteList : {CN=Site4, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum, DC=com,
CN=Site2, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum, DC=com}
Cost : 100
DistinguishedName : CN=SiteLink1, CN=IP, CN=Inter-Site Transports, CN=Sites, CN=Configuration, Dc=Adatum, DC=com
Name : SiteLink2
ObjectClass :SiteLink
ObjectGUID : 9516948e-cd56-4a9b-b6ba-cdf3dd7fe0d1
ReplInterval : 60
SiteList : {CN=Site4, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum, DC=com,
CN=Site2, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum, DC=com}
Cost : 100
DistinguishedName : CN=SiteLink3, CN=IP, CN=Inter-Site Transports, CN=Sites, CN=Configuration, Dc=Adatum, DC=com
Name : SiteLink3
ObjectClass : SiteLink
ObjectGUID : 07a7a37e-a12c-40c4-8042-f5d2e737b8a9
ReplInterval : 60
SiteList : {CN=Site4, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum, DC=com,
CN=Site3, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum, DC=com}
Cost : 400
DistinguishedName : CN=SiteLink4, CN=IP, CN=Inter-Site Transports, CN=Sites, CN=Configuration, Dc=Adatum, DC=com
Name : SiteLink4
ObjectClass : SiteLink
ObjectGUID : 508810dc-30fd-4845-982a-d4552fba2e04
ReplInterval : 45
SiteList : {CN=Site4, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum, DC=com,
CN=Site2, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum, DC=com}
You discover that replication between Dc1 and DC3 takes a few hours.
You need to reduce the amount of time it takes to replicate Active Directory changes between DC1 and DC3.
What should you do?
Which cmdlet should you run?
You have a server named Server1 that runs Windows Server 2012 R2 and uses Windows Server Backup.
You need to identify whether the backups performed on Server1 support bare metal recovery.
Which cmdlet should you run?