You have a Windows Server 2008 R2 Hyper-V server with a single network adaptor that is
connected to a virtual network. The virtual network is configured as External. Virtual
machines (VMs) running on the server are not able to communicate with the host server over
the network. You need to ensure that VMs running on the server are able to communicate
with the host server over the network. In Virtual Network Manager, what should you do?

You are configuring failover clustering.
You need to install multipath support on the servers.
What should you do?

A company uses an iSCSI storage area network (SAN). A 6-terabyte logical unit number
(LUN) is presented to a Windows Server 2008 R2 Datacenter host server. You open Disk

Management on the host server and find that the LUN contains only a fully allocated 2-
terabyte partition. You need to configure the environment to ensure that the partition can be
extended to 6 terabytes. What should you do?

You install Windows Server 2008 R2 Enterprise on a new physical server. You need to
prepare the server to host virtual machines. What should you do?

A company has a Windows Server 2008 R2 Hyper-V server environment. The environment
is managed with Microsoft System Center Virtual Machine Manager (VMM) 2008 R2. You
need to add a new dynamic virtual hard disk (VHD) to an existing virtual machine (VM).
What should you do?

A company has a Windows Server 2008 R2 Hyper-V server environment. The environment
is managed with Microsoft System Center Virtual Machine Manager (VMM) 2008 R2. There
is an existing web server farm that uses Windows Network Load Balancing (NLB). You need
to add a virtual machine (VM) to the web server farm while meeting the following
requirements:
The operating system must be deployed to the VM by using PXE and System Center
Configuration Manager (ConfigMgr) 2007 R2.
After deployment, the VM must converge with the existing NLB cluster.
CPU utilization must be minimized.
What should you do?

A company has a Windows Server 2008 R2 Hyper-V environment. The environment is
managed with Microsoft System Center Virtual Machine Manager (VMM) 2008 R2.
A virtual machine (VM) is a node in a Windows failover cluster.
You need to add a new disk drive to the VM. The disk drive will be shared with all other
nodes m the failover cluster.
What should you do?

A company has an environment that includes servers that run Windows Server 2008 R2 with
Hyper-V. The company requires that all server operating systems be provisioned as virtual
machines (VMs). A server operating system should be provisioned as a physical server only
if it does not function properly as a VM. A new application that runs a Hyper-V supported
version of Linux requires four CPUs and access to 3 terabytes of storage. You need to install
the application to meet the company requirements.
What should you do?

A company has a Windows Server 2008 R2 Hyper-V server environment. The environment
is managed with Microsoft System Center Virtual Machine Manager (VMM) 2008 R2. There

is an existing 10 GB iSCSI storage area network (SAN). A logical unit number (LUN) will be
mounted from the iSCSI SAN. The LUN will be used as a disk drive inside of a virtual
machine (VM). The VM must meet the following requirements:
Support VM Queuing (VMQ)
Have a network speed of at least 10 Gbps
Minimize CPU utilization
You need to prepare the VM to support the LUN.
What should you do?

A company has a Windows Server 2008 R2 Hyper-V server environment. The environment
is managed with Microsoft System Center Virtual Machine Manager (VMM) 2008 R2. The
company requires that all server operating systems be provisioned as virtual machines
(VMs). A server operating system should be provisioned as a physical server only if it does
not function properly as a VM. You are preparing to deploy a VM that will run Windows
Server 2008 R2 Standard. The VM will run a server application that has the following
characteristics:
The server application will use a minimum of 512 MB of memory.
Based on performance monitoring data, the server application consumes 4 GB of memory
during nightly processing.
The network adapter speed must be 10 Gbps or faster.
YOU need to prepare the environment for the server application and ensure that application
performance is maximized.
What should you do?