How should you configure the rules?
###BeginCaseStudy###
Testlet 1
Overview
General Overview
Fabrikam, Inc., is a plastics manufacturer.
Fabrikam has an Exchange Server organization that contains only servers that have Exchange Server 2013
installed.
Physical Locations
Fabrikam has two main offices. The main offices are located in Tampa and Charlotte. The company has 8, 000
users in each office.
Existing Environment
Active Directory Environment
Fabrikam has an Active Directory forest that contains one domain named fabrikam.com. Each office is
configured as an Active Directory site.
The network contains four subnets. The subnets are configured as shown in the following table.
All of the traffic from Subnet1 is routable to Subnet3. All of the traffic from Subnet2 is routable to Subnet4.
All client computers are on Subnet1 and Subnet3 only. Subnet 192.168.1.0/24 and subnet 192.168.10.0/24 are
assigned as the MAPI network.
The network contains four domain controllers. The domain controllers are configured as shown in the following
table.
Network Infrastructure
The network contains the following components:
Two 10-gigabits per second WAN links that connect the Tampa office and the Charlotte office. The links
have a latency of less than 15 ms.
One IP-PBX that is located in the Tampa office. The IP-PBX can use only unencrypted communications.
An Internet connection in the Tampa office and an Internet connection the Charlotte office.
Exchange EnvironmentThe network contains six servers that have Exchange Server 2013 installed. The servers are configured as
shown in the following table.
The Exchange Server environment has the following configurations:
Two data loss prevention (DLP) policies named DLP_Finance and DLP_PII. DLP_Finance is based on a
template named Financial Data – U.S. DLP_PII is based on a template named PII (U.S.).
A mailbox database named UM that hosts only Unified Messaging (UM)-enabled mailboxes and is
replicated between the Mailbox servers in the Tampa office only.
A database availability group (DAG) named DAG1 that contains EX2, EX3, EX5, and EX6. DAG1 is
configured to use DHCP to obtain an IP address.
A Send connector named Tampa SMTP that uses SMTP1 as a smart host. The cost of the Tampa SMTP
connector is 10.
Mailbox servers in the Tampa office that provide outbound SMTP services to the Internet.
A UM dial plan named UM1.
An SMTP relay device named SMTP2 in the Charlotte office.
An SMTP relay device named SMTP1 in the Tampa office.
No client access services are published to the Internet.
Requirements
Exchange Server Issues
The current Exchange Server environment has the following issues:
Due to power failures, the Exchange servers unexpectedly fail, causing databases to fail over. During the
database failovers, the preferred database is not activated, causing an unexpected distribution of active
databases.
An IRM template named No Print or Screenshot is deployed, but the template fails to prevent users from
taking screenshots of email messages.
Technical Requirements
You identify the following technical requirements:
Assign a static IP address to DAG1.
Block all personally identifiable information (PII) data and financial data without exception.
Prevent the forwarding of email messages sent by users who have a value of Legal in their Department
field.
Ensure that the members of a group named HR1 can search all of the mailboxes for sensitive email content.
Use Information Rights Management (IRM) to protect all of the voice mails left for the telephone number of
the human resource (HR) department.
Implement an archiving policy that moves all of the email messages from the mailbox folders to an Archive
mailbox after 30 days and permanently deletes all of the email messages after 365 days.
###EndCaseStudy###
HOTSPOT
You need to configure transport rules to meet the technical requirements for the PII data and the financial data.
How should you configure the rules?
To answer, disable the appropriate rule or rules in the answer area.
Hot Area:
You need to restore the status of MBX1 on EX2 to health…
You have an Exchange Server 2013 organization that contains two servers named EX1 and EX2. EX1 and EX2 are members of a database availability group (DAG) named DAG1.
Your organization contains several managed availability overrides.
Both EX1 and EX2 have a copy of a mailbox database named MBX1. МBХ1 is active on EXl.
You discover that MBX1 on EX2 has a status of ServiceDown.
You need to restore the status of MBX1 on EX2 to healthy as quickly as possible.
What should you do?
What command should you run?
HOTSPOT
You have an Exchange Server 2013 organization that contains two servers named EX1 and EX2. EX1 and EX2
are members of a database availability group (DAG) named DAG1.
You need to identify the last several times that a mailbox database named MBX1 failed over from EX1 to EX2.
What command should you run? To answer, select the appropriate options in the answer area.
Hot Area:
You need to ensure that EX1 will prevent the delivery o…
You have an Exchange Server organization that contains five servers.
Users who have their mailbox on a server named EX1 report that they fail to receive email messages.
You verify that the email messages sent to the mailboxes on EX1 are delivered successfully to the server. You
also verify that all of the mailbox databases on EX1 are mounted.
You discover that the hard disk drive on EX1 has only 10 GB of free space.
You delete 20 GB of unnecessary data on EX1.
Users report that now they are receiving all of their email messages successfully to their mailbox.
You need to ensure that EX1 will prevent the delivery of email messages to mailboxes only if less than 2 GB ofhard disk space is available.
What should you do?
Hot Area:
HOTSPOT
Your company has two main offices named Main1 and Main2. Each office has a data center.
You have an Exchange Server 2013 organization. Each data center contains several Exchange servers and
connects directly to the Internet. Each office has a Send connector to the Internet.
You configure each office as a separate site and you configure Main1 as a hub site.
The company opens a branch office that contains a small data center.
You deploy an Exchange Server 2013 server to the data center. The data center has a direct network link to
Main1.
All of the site link costs are set to the default values.
In the table below identity through which office the email message will be transmitted first for each scenario.
NOTE: Make only one selection in each row.
Hot Area:
Which Windows PowerShell cmdlet should you use?
You have an Exchange Server 2013 organization.
You deploy an anti-spam appliance and you connect the appliance to the Exchange Server organization.
You need to disable keyword filtering of email messages that are received from the Internet.
Which Windows PowerShell cmdlet should you use?
What should you modify?
You have an Exchange Server 2013 organization that contains three Client Access servers named EX1, EX2,
and EX3. The organization also contains eight Mailbox servers.
All users have client computers that have Microsoft Outlook 2013 installed.
You create a Network Load Balancing (NLB) cluster and add all of the Client Access servers as hosts in the
cluster. The cluster has the following configurations:
The default host is set to EX1.
A port rule is configured for HTTPS traffic.
The port rule has the affinity parameter set to Single.
The port rule has the filtering mode set to Single host.
The port rule has the Handling priority set to the default option.
You discover that Outlook always connects to EX1.
You need to ensure that client connection are handled by all three Client Access servers.
What should you modify?
What command should you run?
HOTSPOT
You have an Exchange Server 2013 organization.
You deploy an Office Web Apps Server named Server1.
You need to integrate the Office Web Apps Server and the Exchange Server organization.
What command should you run? To answer, select the appropriate options in the answer area.
Hot Area:
What should you recommend?
HOTSPOT
You plan to deploy an Exchange Server 2013 organization. The organization will contain the servers configured
as shown in the following table.
Server1, Server2, and Server3 will be members of a database availability group (DAG) named DAG1.
You deploy a firewall between the internal network and the Internet.
You need to recommend a solution to meet the following reguirements:
Ensure that users can access their mailbox from the Internet by using Microsoft Outlook if a server fails.
Ensure that users can access Unified Messaging (UM) services from the Internet if a server fails.
Minimize costs.
What should you recommend? To answer, select the appropriate options in the answer area.
Hot Area:
What should you recommend creating?
Your network contains two Active Directory forests named contoso.com and fabrikam.com. Contoso.com is
configured as a user forest. Fabrikam.com is configured as a resource forest.
You deploy an Exchange Server 2013 organization.
You need to recommend a solution to provide five administrators in contoso.com with the ability to manage the
Exchange Server resources by using role-based administration.
What should you recommend creating?