Which IS-IS packet is used to carry routing updates?
Which IS-IS packet is used to carry routing updates?
Which three statements are true regarding the show system switchover operational mode command?
Which three statements are true regarding the show system switchover operational mode
command? (Choose three.)
Which three elements contribute to the bridge ID when configuring RSTP?
Which three elements contribute to the bridge ID when configuring RSTP? (Choose three.)
Which LDP message is used to transmit labels and forwarding equivalency class (FEC) information?
Which LDP message is used to transmit labels and forwarding equivalency class (FEC)
information?
Which command correctly configures this setup?
You are logged into a router and have navigated to the [edit routing-options] level of the hierarchy.
You have been asked to create a static route that will use 43.18.7.1 as its primary next-hop and
76.13.10.2 as its secondary next-hop.
Which command correctly configures this setup?
which Junos routing table stores RSVP egress router information?
By default, which Junos routing table stores RSVP egress router information?
Which command correctly configures this setup?
You are logged into a router and have navigated to the [edit routing-options] level of the hierarchy.
You have been asked to define an aggregate route for 172.30/16.
Which command correctly configures this setup?
how are they grouped?
When sending BGP routes in an Update message, how are they grouped?
What would accomplish this goal?
You work for the regional Internet service provider shown in the exhibit. You have a partial BGP
table and are receiving a 10.100/16 route from your upstream ISP. You have been asked to
configure a default route that can be sent to your downstream customer. This route should forward
customer traffic toward your upstream Tier 1 ISP as long as the 10.100/16 route is present.
What would accomplish this goal?
what is the problem?
— Exhibit –interfaces {
ge-0/0/0 {
vlan-tagging;
unit 100 {
vlan-id 100;
family inet {
address 192.168.100.97/30;
}
family iso;
}
unit 200 {
vlan-id 200;
family inet {
address 192.168.100.94/30;
}
family iso;
}
}
fxp0 {
description “MGMT INTERFACE – DO NOT DELETE”;
unit 0 {
family inet {
address 10.210.10.11/27;
}
}
}
lo0 {
unit 0 {
family inet {
address 192.168.100.1/32;
}
family iso {
address 49.1111.1921.6801.0001.00;
}
}
}
}
protocols {
isis {
interface ge-0/0/0.100;
interface ge-0/0/0.200;
}
}
— Exhibit –Refer to the Exhibit.
An operator is unable to establish any IS-IS adjacencies on a router in the network.
Based on the configuration shown in the exhibit, what is the problem?