All OSPF routers shown in the exhibit booted at the same time, and the network has stabilized.
How many adjacencies does R1 have?

You have two routers, R1 and R2, running OSPF in area 0. Router R1 is having problems with
forming and adjacency with Router R2.
Referring to the exhibit, which statement is correct about the OSPF configuration in the Router R1
trace output?

— Exhibit —
user@Switch-1# run show dhcp snooping binding
DHCP Snooping Information:
MAC address IP address Lease (seconds) Type VLAN Interface
00:26:88:02:74:89 172.28.1.4 – static default ge-0/0/9.0
00:26:88:02:74:86 172.28.1.2 86113 dynamic default ge-0/0/6.0
00:26:88:02:74:87 172.28.1.3 86378 dynamic default ge-0/0/7.0
— Exhibit —
DHCP snooping is implemented on an EX Series switch. The results display a static MAC to IP
binding on interface ge-0/0/9 as shown in the exhibit.
Which statement is correct?

— Exhibit —
policy-statement load-balance {
from {
route-filter 172.24.0.0/24 exact;
route-filter 172.24.1.0/24 exact;
}
then {
load-balance per-packet;
}
}
— Exhibit —
Referring to the exhibit, which command or set of commands completes the configuration that will
load balance packets to destinations 172.24.0.0 and 172.24.0.1?

— Exhibit —
[edit]
user@router# show routing-options
graceful-restart {
disable;
}
[edit]
user@router# show protocols bgp
graceful-restart;
group my-group {
type internal;
local-address 192.168.1.1;
neighbor 192.168.1.2;
neighbor 192.168.2.2 {
graceful-restart {
disable;
}
}
— Exhibit —
You have configured your router as shown in the exhibit.
Which statement is true based on the graceful restart (GR) configuration?

Referring to the exhibit, you want to avoid using STP and the LAG is configured on ae0.

Which function would you use to prevent a Layer 2 loop?

Referring to the exhibit, which interfaces will receive a packet sent to MAC address
00:05:85:7F:EB. 80 from the user with IP address 10.10.10.10?

You have an Ethernet frame with an unknown destination address.
Which steps are required for the switch to process and forward the Ethernet frame?

What is the purpose of the native VLAN?

Two switches are powered on at the same time on the same LAN segment.
By default, what determines which switch will become the designated bridge?