PrepAway - Latest Free Exam Questions & Answers

Category: JN0-643 (v.1)

Exam JN0-643 : Juniper Networks Certified Internet Professional (JNCIP-ENT)

How many hops will the packets take through this topology? (Do not count node A

Refer to the Exhibit.

The four routers in the exhibit are participating in a multi-area OSPF topology. Node B (in the upper right-hand corner) is an ASBR advertising an external route. Node A (lower left-hand corner) receives the external route and begins to forward traffic to the ASBR.

How many hops will the packets take through this topology? (Do not count node A.)

What would you add to implement these policies?

A coffee shop offering free Internet service to customers wants to implement the following security policies:

1. Every customer must agree to a set of terms and conditions before accessing the Internet.

2. Log out customers that are logged in for more than one hour.

3. Log out customers that are idle for more than 5 minutes.

4. Authenticate employee desktop computers with known hardware addresses in the office of the coffee shop to access the Internet without the above restrictions.

The following configuration has been applied to the switch:

set access radius-server 172.16.14.26 port 1812

set access radius-server 172.16.14.26 secret Am@zingC00f33

set access profile dot1x authentication-order radius

set access profile dot1x radius authentication-server 172.27.14.226

What would you add to implement these policies?

Which configuration on switch S1 allows Site 1 and Site 2 to exchange Cisco Discovery Protocol (CDP), but bloc

Refer to the Exhibit.

In the exhibit, switches S1, S2, and S3 have Q-in-Q tunneling configured between Site 1 and Site 2.Which configuration on switch S1 allows Site 1 and Site 2 to exchange Cisco Discovery Protocol (CDP), but blocks VLAN Trunking Protocol (VTP) between Site 1 and Site 2?

Without changing the primary VLAN assignments, which JUNOS feature meets this requirement with minimal configu

Your customer has five office locations. Each office location has 20 VLANs configured, one for each department. Your engineering team has recently secured a government contract with strict regulations which require that engineers be placed into separate workgroups. These workgroups cannot communicate with each other. Without changing the primary VLAN assignments, which JUNOS feature meets this requirement with minimal configuration?


Page 6 of 12« First...45678...Last »