A coffee shop offering free Internet service to customers wants to implement the following security
policies:
1. Every customer must agree to a set of terms and conditions before accessing the Internet.
2. Log out customers that are logged in for more than one hour.
3. Log out customers that are idle for more than 5 minutes.
4. Authenticate employee desktop computers with known hardware addresses in the office of the
coffee shop to access the Internet without the above restrictions.

The following configuration has been applied to the switch:
set access radius-server 172.16.14.26 port 1812
set access radius-server 172.16.14.26 secret Am@zingC00f33
set access profile dot1x authentication-order radius
set access profile dot1x radius authentication-server 172.27.14.226
What would you add to implement these policies?

Refer to the Exhibit.

In the PIM-SM network in the exhibit, all links in the topology have the same IGP metric
configured.
Which link will not be on the RPT?

Refer to the Exhibit.

In the exhibit, Site 1 is sending traffic on VLANs 100, 200, and 300. The provider operating switch
S1 must configure Q-in-Q tunneling to transport VLANs 100 and 200 to Site2. The provider must
configure switch S1 to block traffic received from site 1 on VLAN 300.Which configuration
accomplishes this goal?

Refer to the Exhibit.

The four routers in the exhibit are participating in a multi-area OSPF topology. Node B (in the
upper right-hand corner) is an ASBR advertising an external route. Node A (lower left-hand corner)
receives the external route and begins to forward traffic to the ASBR.

How many hops will the packets take through this topology? (Do not count node A.)

Refer to the Exhibit.

The phone connected to switch-1 in the exhibit cannot communicate with the rest of the network.
How do you solve this problem?

You are AS 6573.Which AS path regular expression matches only routes originated in your AS?

Which protocol reachability is advertised by OSPFv2? (Choose two.)

Refer to the Exhibit.

You are using an IBGP route reflector within your network. Your route reflector has received the
2001:1:2::/64 prefix, but it is not advertising the prefix to its cluster members. After examining the
route reflector, you notice the output shown in the exhibit.Which configuration statement causes
the route reflector to transmit the route to its IBGP peers?

Refer to the Exhibit.

Referring to the exhibit, R4 in AS 100 is sending routes 20.0.0.0/8 and 10.0.0.0/8. R3 sees the
routes but R5 does not.
What must be configured on the R3 router for the R5 router to install the routes?

Refer to the Exhibit.

The CLI output shown in the exhibit was taken from the RP in a PIM-SM network.
Which statement explains the output shown in the exhibit?