Which of the following are examples of metrics for QoS?
Which of the following are examples of metrics for QoS? A. Signal degradation, attenuation, line loss B. Latency, FIFO, WRED C. Delay, jitter, packet loss D. SNR, queue depth, latency E. Attenuation, dispersion, latency
The IP ToS field consists of ________ bits, of which ________are used. The _________most significant (first) b
The IP ToS field consists of ________ bits, of which ________are used. The _________most significant (first) bits define precedence. A. 8, 6, 3 B. 8, 8, 6 C. 16, 8, 4 D. 8, 6, 4 E. 24, 16, 8
How was standard BGP modified to allow it to carry routing information for VPRNs?
How was standard BGP modified to allow it to carry routing information for VPRNs? A. By using the MED attribute to carry the OSPF metric. B. By defining Extended Communities for use as the Route Target C. By using the Cluster List attribute to carry the network prefix D. By defining support for the VPN-IPv4 […]
Where are VPN-IPv4 addresses used in a VPRN?
Where are VPN-IPv4 addresses used in a VPRN? A. In the routing updates exchanged from CE to PE B. In the routing updates exchanged from PE to PE C. In the routing updates exchanged from P to PE D. In customer packets as they traverse the provider core E. In all route tables of the […]
What is the purpose of the Route Distinguisher?
What is the purpose of the Route Distinguisher? A. It defines the VPN membership B. It defines which routes are imported into the vrf C. It defines which routes are exported from the vrf D. It is used to make IPv4 addresses unique E. It is used as the VPN label
VPN-IPv4 addressing is made unique by defining an address structure consisting of
VPN-IPv4 addressing is made unique by defining an address structure consisting of: A. A 32 bit IPv4 address followed by a 64 bit Route Target B. A 32 bit IPv4 address followed by a 64 bit Route Distinguisher C. A 64 bit Route Target followed by a 32 bit IPv4 address D. A 64 bit […]
Which of the following describes how a route is handled when is received at the PE from the local CE?
Which of the following describes how a route is handled when is received at the PE from the local CE? A. It will be placed into the customer VRF and automatically propagated into the BGP table B. It will be placed into the customer VRF and then be propagated to the BGP table only if […]
At what point does the Route Target become associated with a route?
At what point does the Route Target become associated with a route? A. When the route is first received at the P from the PE B. When the route from the CE is populated into the VRF at the PE C. When the route from the PE is populated into the VRF at the CE […]
In a provider core consisting of 6 PE and 4 P routers, what is the minimum number of BGP sessions required in
In a provider core consisting of 6 PE and 4 P routers, what is the minimum number of BGP sessions required in total for correct operation of VPRN services? A. 0 B. 5 C. 10 D. 15 E. 45
Which method does the Alcatel-Lucent 7750 SR use for the allocation of VPRN labels?
Which method does the Alcatel-Lucent 7750 SR use for the allocation of VPRN labels? A. One label per route B. One label per next-hop C. One label per VRF D. One label per prefix E. One label per tunnel