A customer has a 6-node AFF A700 cluster and wants to add four nodes without having to update license functionality for each node manually. In this scenario, which type of license provides this functionality? A. Demo License B. Site License C. Standard License D. Evaluation License

A 4-node cluster has connectivity for both block and file access. Nodes 1 and 3 are used for file access, and nodes 2 and 4 are used for block access. During routine maintenance, node 4 is switched off and the LIFs are migrated to other nodes. Upon investigation, you see that the LIFs that serve […]

You completed the installation of an AFF A700s with NetApp CN1610 switches. You used ports e0a and e0f with breakout cables to connect the controllers to the interconnect switches. After completing the cluster setup, ports e0e and e0i are not visible in OnCommand System Manager. In this scenario, what caused this problem? A. Breakout cables […]

Node 3 has taken over Node 4. You are attempting to access Node 4 on its management interface but cannot do it. In this scenario, how would you access Node 4’s management interface? A. You must use the Service Processor; node management LIFS do not fall over between nodes. B. You have not waited long […]

When planning the installation of a new ONTAP 9.5 cluster for a customer, which three steps should you perform? (Choose three.) A. Complete a Service Event Report. B. Use Config Builder to create a configuration spreadsheet. C. Review the hardware components in Hardware Universe. D. Open a support case to prepare for the installation. E. […]

You just installed two nodes into an existing ONTAP cluster. When running date on the CLI you notice that the cluster1-03 node is running behind time. You confirmed that you can reach the node management LIF of each node. Referring to the exhibit, which statement is true? A. The node-management LIF has to be on […]

You install a new FAS2650 HA with a DS224C disk shelf and ONTAP 9.5 on a customer site. Referring to the exhibit, which steps are required to get an HA cabled system? A. 1. Insert a cable from right controller port 0a to IOMB port 2, and from port 0b to IOMA port 4. 2. […]

Which LIF type is used by default for hardware-assisted storage failover communication? A. intercluster B. node-mgmt C. data D. cluster-mgmt Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-cmpr-950%2Fstorage__failover__hwassist__show.html

Which NetApp tool relies on PowerShell to produce a comprehensive handover report to the customer? A. Active IQ B. Config Advisor C. NetAppDocs D. Fusion

You are completing an ONTAP base installation, and your customer is asking you to create two SVMs, one for NFS and one for SMB. Which type of SVM needs to be created to complete the installation? A. system SVM B. data SVM C. admin SVM D. multitenancy node SVM