What is the broadcast address for this network?
You are configuring the IP addressing for your network. One of the subnets has been defined with
addresses already. You run ifconfig on a host and determine that it has an address of
10.12.32.18/14. What is the broadcast address for this network?
what is the function of the first four bits?
During a network analysis session, you capture several TCP/IP sessions. You focus your analysis
on the
IP Headers. In an IP Header, what is the function of the first four bits?
what is the function of the Transport Layer?
In order to properly manage the network traffic in your organization, you need a complete
understanding of protocols and networking models. In regards to the 7-layer OSI model, what is
the function of the
Transport Layer?
What address range are you going to address on the firewall?
In your organization a decision has been made to implement a multicasting application. You are
configuring your firewall to allow this application to flow through in both directions. What address
range are you going to address on the firewall?
From this information you gather that:
In your network, you manage a mixed environment of Windows, Linux, and UNIX computers. The
clients run Windows 2000 Professional while the Servers are UNIX and Linux based with custom
applications.
During routine administration you successfully ping several nodes in the network. During this you
are running a packet capture for further analysis. When examining one of the frames you notice
that the Ethernet address for the source is 1ED0.097E.E5E9 and that for the destination is
1ED0.096F.5B13. From this information you gather that:
What is the IP Protocol ID of ICMP?
You suspect an increase in malicious traffic on your network. You run several packet captures to
analyze traffic patterns and look for signs of intruders. While studying the packets, you are
currently looking for ICMP Messages. You choose to use the IP Protocol ID to locate different
kinds of packets. What is the IP Protocol ID of ICMP?
What will the router that identified the TTL as zero return to the host that originated the trace command?
You have used a diagnostic utility to run a trace between two nodes on your network. During the
trace, you are running a packet capture utility and notice the TTL is reaching zero on the trace.
What will the router that identified the TTL as zero return to the host that originated the trace
command?
what will the SEQ and ACK values be for the initializing packet?
Recently you feel your network has been attacked by people sending out of spec packets to your
firewall
in order to get past the firewall rules. You have decided that you will capture all the packets on the
firewall segment with network monitor to analyze the TCP headers for proper use. If you capture a
packet that is the first part of a legitimate three way handshake between two Windows 2000
professional computers, what will the SEQ and ACK values be for the initializing packet?
what is the function of the first eight bits?
During a network packet capture in Wireshark, you capture ICMP traffic, and are analyzing this
capture.
In an ICMP Message, what is the function of the first eight bits?
What is the IP protocol ID for TCP?
You are introducing a co-worker to the security systems in place in your organization. During the
discussion you begin talking about the network, and how it is implemented. You decide to run a
packet capture to identify different aspects of network traffic for your co-worker. In the packet
capture you are able to identify Protocol IDs. What is the IP protocol ID for TCP?