Which problem does this not prevent?
Problems can be prevented by looking closely at the way the starting point for the test execution
must be structured and which process must be deployed when using it. Which problem does this
not prevent?
Which of the following shows the correct syntax for the banner creation?
When you took over the security responsibilities at your office, you noticed there were no warning
banners on any of the equipment. You have decided to create a warning login banner on your
Cisco router.
Which of the following shows the correct syntax for the banner creation?
Based on this configuration, and using the exhibit, select the answers that identify what the list will accomp
You are configuring the Access Lists for your new Cisco Router. The following are the commands
that are entered into the router for the list configuration.
Router(config)#access-list 13 deny 10.10.10.0 0.0.0.255
Router(config)#access-list 13 permit 10.10.11.0 0.0.0.255
Router(config)#access-list 15 deny 10.10.12.0 0.0.0.255
Router(config)#access-list 15 permit 10.10.11.0 0.0.0.255
Router(config)#interface Ethernet 0
Router(config-if)#ip access-group 15 out
Router(config-if)#interface Ethernet 2
Router(config-if)#ip access-group 15 out
Based on this configuration, and using the exhibit, select the answers that identify what the list will accomplish.
How many test situations are produced when the coverage type decision points condition/decision coverage is us
See the following specification:
How many test situations are produced when the coverage type decision points condition/decision
coverage is used?
Which of the following shows the correct syntax to modify the password for all the Terminal sessions?
You have been given the task of router configuration and security in your network. One of the first
things
you wish to do is to modify the Terminal password. Which of the following shows the correct
syntax to modify the password for all the Terminal sessions?
How many logical test cases result in an error message?
See the specification below:
Apply the Decision Table Test to the above specification. When doing this, use the coverage type
multiple condition coverage. How many logical test cases result in an error message?
What is the command to turn off CDP for the entire router?
You are configuring your new Cisco router. During your configuration you wish to eliminate any
security risks you can, as based on your organizational security policy. The policy states that the
Cisco Discovery
Protocol is not to be used on any interface on any of the routers. What is the command to turn off
CDP for the entire router?
What is the definition of ?valuation?
What is the definition of valuation?What is the definition of ?valuation?
what attack will you be defending against?
You are concerned about attacks against your network, and have decided to implement some
defensive measure on your routers. If you have 3 interfaces, S1, S0, and E0, and you implement
the following configuration, what attack will you be defending against?
Router#config terminal
Router(config)# Interface Ethernet 0
Router(config-if)#no ip directed broadcast
Router(config-if)#Interface Serial 0
Router(config-if)#no ip directed broadcast
Router(config-if)#Interface Serial 1
Router(config-if)#no ip directed broadcast
Router(config)#^Z
Router#
Which defects can be detected more effectively with development tests than with system and/or acceptance tests
Which defects can be detected more effectively with development tests than with system and/or
acceptance tests?