Which tools can be used to configure IPv6 on an installed VNX Control Station that was initially
configured as IPv4?
A.
Unisphere and CLI only
B.
CLI and VNX Installation Assistant only
C.
Unisphere and VNX Installation Assistant only
D.
Unisphere, CLI, and VNX Installation Assistant
Explanation:
The VNX Control Station can be configured for using IPv6 during the installation process, or later
using either Unisphere, or CLI. With the current version of VNX code, the control station supports
two types of IP configuration. The configurations supported are; IPv4 only and IPv4/IPv6 at same
time. The configuration of IPv6 only is not currently supported.
For more information on IPv6, please refer to the three-day IPv6 Workshop provided by EMC.
NotE. VNX Installation Assistance cannot be used for configuring IPv6.