A storage administrator is planning to implement Dynamic Cache Partitioning (DCP) on an EMC Symmetrix VMAX array. There are five applications running on hosts attached to this array. The administrator wants to ensure that none of these applications have any effect on each other due to cache conflicts.
Which steps need to be completed to configure DCP?
A.
1. Create 5 new Dynamic Cache Partitions
2. Define Target%=20 for each partition
3. Define Min%=20, Max%=20, and Donation Age= 3600 seconds for each partition
4. Enable Cache Partitioning
B.
1. Create 5 new Dynamic Cache Partitions
2. Define Target%=20 for each partition
3. Define Min%=0, Max%=100, and Donation Age= 0 seconds for each partition
4. Enable Cache Partitioning
C.
1. Create 5 new Dynamic Cache Partitions
2. Define Target%=20 for each partition
3. Define Min%=0, Max%=100, and Donation Age= 3600 seconds for each partition
4. Enable Cache Partitioning
D.
1. Create 5 new Dynamic Cache Partitions
2. Define Target%=15 for each partition
3. Define Min%=15, Max%=15, and Donation Age= 0 seconds for each partition
4. Enable Cache Partitioning