A Celerra administrator is implementing a native iSCSI solution. The following steps were
executed in order to implement the solution:
– Created the iSCSI targets
– Created and mounted a file system dedicated to iSCSI storage
– Created the iSCSI LUNs and the LUN masks
However, the administrator is unable to log in to the targets. What is the cause of the problem?
A.
iSCSI service is stopped.
B.
iSNS server is misconfigured.
C.
Initiator is unregistered.
D.
CHAP authentication is disabled.
Explanation:
Configuring iSCSI on the Celerra
– Configure the Celerra iSCSI LUNs
* Create ISCSI target
* Create and mount iSCSI file system for iSCSI LUNs
* Create iSCSI LUNs and LUN masks
* Optionally, configure iSNS and CHAP on the Data Mover
* Start the iSCSI service
– Configure the iSCSI Initiator
* Register the initiator in the registry
* Configure iSCSI discovery
* log into iSCSI target
* Configure iSCSI drives
0
0