An operator must shut down the standby Control Station CS1 on a VNX configured with dual
Control Stations. What action, if any, does the operator need to take to allow management and
monitoring of the VNX to continue when CS1 is offline?
A.
The operator needs to manually run the cs_standby command for the standby Control Station
to assume the primary role.
B.
No action required; CS0 continues to operate with the primary Control Station role.
C.
The operator needs to manually run the cs_standby command to shut down the standby
Control Station.
D.
No action is required; management and monitoring functions are not provided to the Celerra by
the Control Stations.
Explanation:
The standby Control Station, also known as Control Station 1, or CS1, provides a
redundant capability if the primary Control Station fails. For the standby Control Station to work,
both Control Stations must be fully configured and operational. The standbyControl Station is an
optional component of the VNX