You are designing Cisco fabrics that are dedicated to the provisioning of Invista volumes.
Virtualization is provided via a pair of MDS-9216 switches with SSM blades.
What is the preferred use of the 16 FC ports on each 9216 supervisor?

An Microsoft Exchange 2007 customer encounters an issue with non-MAPI clients accessing the
server.
Which Microsoft Exchange server component would you suggest they begin their troubleshooting?

ABC.com’s existing fabrics contain MDS 9509 switches with two additional FC modules in each of
them. They want to integrate Invista into this environment. The plan is for the existing 9509s to
host virtualization services.
Which license would you check for on the 9509s?

ABC.com has been using EMC NetWorker for the past five years as a backup application in their
environment. Over the five years, several new systems were added in the customer’s environment
that are not part of the backup network. The customer is now planning to assess their
infrastructure to determine the systems that need to be backed up. Which application should you
use to gather this information?

ABC.com is evaluating an NS40 and an NS40G as a solution for their NAS environment. They are
unsure of the differences in the models and require further explanation. They currently have a
CX3-40 with a substantial portion of the disk available that they would like to be used by the
Celerra.
Which statement accurately describes the required equipment?

A potential EMC Center ABC.com has three priorities, in order of importance, for archive storage:
Optimum usage of storage
Enhanced collision resistance
Enhanced performance
Which configuration combination should you propose?

An EMC Center ABC.com is planning to add a new application. Their EMC Centera uses:
Gen4 hardware CPP as a protection scheme
S/AN Object size = 128K
The customer expects the new application to add approximately 500 objects before their next
purchasing cycle. Based on preliminary calculations, they believe they have enough available
capacity. The customer would like you to validate their calculations. The EMC Centera is
configured for 50 TB of usable capacity and has approximately 12 TB free.
What remaining information do you need to determine if the customer has enough storage
capacity?

You have created the initial design for ABC.com’s NAS solution. Other than the NAS Support
Matrix, which tool should be used to check for last-minute feature updates?

ABC.com is testing the use of SAN Copy in their environment and has asked you to explain how to
set up the Storage Groups to replicate from SAN A to SAN

ABC.com with a SAN-attached CX3-40 needs to add 10 test servers to the environment. They
want to use iSCSI to attach the servers. They also want to boot the hosts over iSCSI from the
CX3-40.
Assume there is available disk space and iSCSI connectivity into the SAN. What would you verify
during planning and design for this project?