How would you fix the problem?
A customer has configured iSCSI devices on a Windows using DHCP. The DHCP lease expired
and now the customer can not see the iSCSI devices. The Windows host is using the Microsoft
iSCSI driver version 1.0.6 and is connected to an M-series 1620 running firmware 4.4.0. How
would you fix the problem?
What is the maximum bandwidth for an OC3 circuit?
The customer has decided to create an SRDF environment. He wants to extend his existing fabric
approximately 500 kilometers using FCIP. What is the maximum bandwidth for an OC3 circuit?
Which security IP protocol would you implement if you required host-switch authentication?
Which security IP protocol would you implement if you required host-switch authentication?
What must be done for the customer to monitor the switch?
A Customer is unable to monitor a Connectrix MDS switch from ControlCenter. What must be
done for the customer to monitor the switch?
What must be done to allow the server to boot?
A Customer is attempting to configure Windows hosts to boot from the SAN. They accessed the
SAN volume and successfully installed the OS. When the server reboots it cannot find the
operating system. What must be done to allow the server to boot?
Which ControlCenter Storage Provisioning Services steps will reduce the time it takes to provision storage to
The customer has 400 identical servers that need to be allocated the same amount of storage
space and storage protection. This task is estimated to take 400 man hours. Which ControlCenter
Storage Provisioning Services steps will reduce the time it takes to provision storage to 8 man
hours?
what is the maximum number of switches for a full mesh fabric using DS-16B3 switches?
Using EMC’s Best Practices, what is the maximum number of switches for a full mesh fabric using
DS-16B3 switches?
What could be the problem with the third server?
The customer has added three identical Windows 2000 servers to a DMX through native iSCSI.
The first server works fine connecting to LUNs 0-5. The second server works fine connecting to
LUNs 6-7. The third server does not see LUNs 8-9. What could be the problem with the third
server?
What is the issue?
Refer to the Exhibit.
The customer added a new iSCSI server to the MP-1620M. They can not
access the storage array on IP address 10.5.19.1. The customer’s network is setup for Fast
Ethernet. Please see exhibit. What is the issue?
What is the reason for this?
Your customer is booting their dual-attached HP-UX servers from the DMX via an M-series SAN.
They are using PowerPath 4.x. Over the weekend they added a new switch and changed some
storage cabling. Now they cannot boot up the servers. What is the reason for this?