How will ALUA handle this path failure to ensure continued connectivity to LUNs 100 and 101?
A customer has one host attached to each SP on a VNX. SP A owns LUNs 100 and 101, which
run critical applications. The customer notices that SP A has experienced a back-end failure and
consequently has lost connectivity to these LUNs. How will ALUA handle this path failure to
ensure continued connectivity to LUNs 100 and 101?
What is the maximum number of paths supported on this host?
A Windows host with PowerPath installed is connected to a VNX storage array with iSCSI. What is
the maximum number of paths supported on this host?
Which kind of network cable should be used?
A host in the data center will be connected with iSCSI to a VNX storage array located 110 meters
from the server. Which kind of network cable should be used?
What action should be done to align data to LUN structure on a Windows 2008 raw disk?
What action should be done to align data to LUN structure on a Windows 2008 raw disk?
Why the application experienced only minimal impact to performance?
One of the hosts HBAs has experienced a registered state change notification (RSCN), and was
required to log in to the fabric again. However, the application experienced only minimal impact to
performance. Why?
what point should you align them?
You have just allocated new volumes to your Windows 2003 host and were informed that you
need to align the disk to prevent performance issues. What tool should you use to align the disks
and at what point should you align them?
What is one possible reason for these performance issues?
A customer is experiencing performance issues after creating SnapView snapshots of existing
Windows 2008 data LUNs. What is one possible reason for these performance issues?
what is the recommended element size on the LUNs?
You are carving LUNs on your VNX to attach to your Windows hosts. According to EMC best
practice, what is the recommended element size on the LUNs?
which tool is used to view target WWPNs?
On a Windows host with Emulex HBAs installed, which tool is used to view target WWPNs?
which available features?
Unified Storage Management in VSI for VMware vSphere has which available features?