For the third Disk Array Enclosure, what is the enclosure ID and the Loop ID?
Every Disk Array Enclosure has a Loop ID and an Enclosure ID which are both set by the Enclosure Address Switch. For the third Disk Array Enclosure, what is the enclosure ID and the Loop ID?
Which settings are needed to configure Com 1 properties, to set up a Hyper Terminal connection to the Control
Which settings are needed to configure Com 1 properties, to set up a Hyper Terminal connection to the Control Station?
Name the RAID 5 group type and Disk drive type.
The Celerra Control LUNs must be configured from a RAID 5 Group on an NS600G/GS. Name the RAID 5 group type and Disk drive type.
Explain what happened.
An IP address of 169.254.0.4 is returned for a Windows 2000 client upon issuing IPCONFIG, which isn’t a valid address in the DHCP server’s scope. Explain what happened.
On the Control Station, what does the Init Wizard configure?
On the Control Station, what does the Init Wizard configure?
In an Ethereal trace output, which protocol would indicate a CIFS transaction?
In an Ethereal trace output, which protocol would indicate a CIFS transaction?
Name why the Data Mover enclosure has three fans and two power supplies.
Name why the Data Mover enclosure has three fans and two power supplies.
Name the component on a DAE2 which can be hot swapped.
Name the component on a DAE2 which can be hot swapped.
The AUX port on a Data Mover can be connected to?
The AUX port on a Data Mover can be connected to?
Name the Celerra server command which you would use to find the NFS clients (by IP address and port) connected
Name the Celerra server command which you would use to find the NFS clients (by IP address and port) connected to a datamover (server_x).