Where must you install the console to enable the Storage Team to perform their management tasks?
A customer has the environment shown in the graphic. The customer has a very tight security policy for their networks and has installed separate NAT firewall zones for all of their sites. The customer has reported that network latency is within the supported limits for ControlCenter. A large, distributed two-Store ControlCenter infrastructure has been purchased and installed at Site 1. The Storage Team is located at Site 2. Where must you install the console to enable the Storage Team to perform their management tasks?
If asked, which two [2] features are to be recommended?
You have just completed a basic implementation of an NS700 with 30 FC and 30 ATA drives. The customer has been using the EMC CLARiiON and Connectrix products for some time. She mentions that they are looking to lower the backup storage cost, which includes their Exchange 2003 Servers.
If asked, which two [2] features are to be recommended?
What should the customer do?
A customer is experiencing performance problems with ControlCenter Consoles. A memory upgrade did not solve the issue. What should the customer do?
Why FCC Agent on Host A can still perform assisted discoveries?
An 8-port blade of an IP switch has failed, so a network administrator contacts you to see if ControlCenter has any issues. Testing shows that Host B no longer has a connection to subnet 2, and that an FCC Agent on Host B can no longer perform an assisted discovery of the FCC switch.
The FCC Agent on Host A can still perform assisted discoveries. Why?
What might be causing the performance problem?
Your customer recently added a new department of approximately one hundred people. The new department’s data shares were created on the existing Celerra currently serving one thousand users. Only the new users are experiencing performance problems when accessing the data shares. The Celerra is configured with a single, four port EtherChannel trunk using MAC addressing statistical load balancing. Your customer has reported that one of the interfaces in the trunk has three times the packet count of the other ports in the trunk.
What might be causing the performance problem?
What are two [2] types of VisualSRM scans?
What are two [2] types of VisualSRM scans?
Which command is used to mark the directory online to keep from migrating their .snapshot directory?
Your customer has a Netapp filer that they want to migrate to their new Celerra. They are running NFS on the box and you are using CDMS to migrate the data.
Which command is used to mark the directory online to keep from migrating their .snapshot directory?
What is the purpose of a ControlCenter "generic" alert?
What is the purpose of a ControlCenter “generic” alert?
What could have caused the move?
Several file systems were replicated. After customer verification, the replicated file systems were put into production. An hour later, the datamover panicked causing a reboot. After the reboot, users started complaining of missing files on one file system.
The customer thought it was an unsuccessful replication. We found the reported missing files in the lost+found directory.
What could have caused the move?
How can this report be generated?
A ControlCenter customer in the United Kingdom wants to generate Chargeback reports which are based on the number of array devices allocated to each server. The data should be derived from ControlCenter and show the chargeback amount per server in Pounds Sterling.
How can this report be generated?