Which migration methods are appropriate for this project?
A customer wants to migrate their existing Symmetrix to a new DMX within the same data center.
They use a combination of Windows, HPUX, Solaris, and Linux servers. The customer has also decided to change their standard LUN size from the existing fourmember metavolumes consisting of 8.5 GB hypervolumes to a single 34 GB hypervolume.
Which migration methods are appropriate for this project?
What is the most important release management document to develop before your first dry run?
You are employed as the Storage Administrator (SA) at Certkiller .com. You need to perform a Data center migration of one Symmetrix frame that supports 12 servers. Swing boxes have been installed at each site and new servers at the destination site. What is the most important release management document to develop before your first dry run?
Which three [3] characteristics describe the ControlCenter Server component?
Which three [3] characteristics describe the ControlCenter Server component?
Which IP address should be assigned to the management host that will be used to run the Navisphere Storage Sys
HPG Supplies purchased four new CX700s for its environment. The CLARiiONs will be configured with IP addresses in the range of 10.127.50.200 through 10.127.50.220, with subnet mask 255.255.255.192. Which IP address should be assigned to the management host that will be used to run the Navisphere Storage System Initialization Wizard?
What should be changed in this environment to accommodate a large number of new switches?
A customer currently uses EMC ControlCenter to manage a number of servers, switches, and arrays.
The EMC ControlCenter configuration includes a single Store and three Fibre Channel Connectivity Agents.
What should be changed in this environment to accommodate a large number of new switches?
What is the next question you should ask business management?
You work as a design specialist at Certkiller .com. You are in the “Determining Perspective” phase of an ILM assessment. Certkiller .com decides to decentralize business functions. What is the next question you should ask business management?
What is most likely the problem?
You are deploying a new Windows 2000 host into your SAN and have performed the following steps:
-Physically connected the host to the SAN
-Installed the Master and Host agents on the host
-Used SAN Manager to zone the Host’s HBA to the Symmetrix port FA5b0
-Used SAN Manager to add the new zone to a new copy of the active zoneset and then activate that zoneset
-Used SDR to map device 02A to port FA5b0
-Used the Masking Wizard to mask device 02A to the host’s HBA -Rebooted the Windows Host
After completing this process, the host still does not see device 02A
What is most likely the problem?
What is the problem?
A Sun SOLARIS host has just been added to the SAN. After validating that the cabling is good, the HBAs do not appear in the SAN. What is the problem?
you need to design the solution?
A customer is developing a custom application and wishes to archive data to an EMC Centera. You have gathered information on the following data requirements:
Object size Peak usage hours Batch processing needs What other information about the environment do you need to design the solution?
What is EMC’s supported upper limits for the maximum of ISLs between the switches?
You work as the network administrator at Certkiller .com. Certkiller .com has two switches in a high availability configuration.
What is EMC’s supported upper limits for the maximum of ISLs between the switches?