Which three [3] factors affect ControlCenter performance and scalability?
Which three [3] factors affect ControlCenter performance and scalability?
Which SAN switch provides this functionality?
You have been asked to attend a pre-sales meeting with a client. During the meeting, the client begins to ask questions about SAN switches. The client specifies that they want a SAN switch which can associate “user friendly” names with WWPNs for zoning. Which SAN switch provides this functionality?
After zoning the DMX ports to the CX SPports, what else must you do prior to setting up the SAN Copy sessions?
A customer is planning to migrate data from a DMX1000 to a CX340. Both arrays are in the same SAN. A script will be created to set up and start the SAN Copy sessions.
After zoning the DMX ports to the CX SPports, what else must you do prior to setting up the SAN Copy sessions?
In which of the following documents, should the required standard time-to-provision be recorded?
In which of the following documents, should the required standard time-to-provision be recorded?
When the first device is added to a thin pool is RAID 1, what other types of protected devices can be added to
When the first device is added to a thin pool is RAID 1, what other types of protected devices can be added to same thin pool?
Which description best describe Data Collection Policies (DCP’s)?
Which description best describe Data Collection Policies (DCP’s)?
Assuming no hardware problems, good cables and a properly configured host, what is the most likely problem?
Your customer attached its host to a CLARiiON through an ED-64M switch. The host HBA is not logging into the fabric. Assuming no hardware problems, good cables and a properly configured host, what is the most likely problem?
Which tool should you use to generate the report?
A customer is managing EMC NetWorker in a large environment. The backup administrator wants to know how many backups were successful the previous night, how many of those backups completed within the backup window, and how many spilled over the backup window.
Which tool should you use to generate the report?
What is the minimum number of 2 Gbit array ports Certkiller .com should use to handle this workload as well as
You work as a design specialist at Certkiller .com. Certkiller .com has four applications (A, B, C, and D) that run daily as follows:
1. A has its consistent peak workload of 20 K IOPS with an average 8 KB blocksize for 3 hours from 10am
2. B has its consistent peak workload of 25 K IOPS with an average 4 KB blocksize for 4 hours from midday
3. C has its consistent peak workload of 25 K IOPS with an average 8 KB blocksize for 3 hours from 1pm
4. D has its consistent peak workload of 15 K IOPS with an average 4 KB blocksize for 4 hours from 11am
You need to ensure best performance while incorporating 25% growth.
What is the minimum number of 2 Gbit array ports Certkiller .com should use to handle this workload as well as the 25% growth into a single array?
Whatis a prerequisite for a HotPull Open Replicator?
Whatis a prerequisite for a HotPull Open Replicator?