what must be done to the Windows partition on the new host to see the LUN as 100 GB?
Using SAN Copy, a source Windows LUN of 100 GB has been copied to a 200 GB target LUN.
After assigning the target LUN to the new host and running Disk Administrator to recognize the
drive,what must be done to the Windows partition on the new host to see the LUN as 100 GB?
Which information must you have to ensure that the proposed solution will meet the customer’s needs?
ABC.com has been running a CX3-40 for the past year to present SAN LUNs. The customer
wants to use network shares for a number of clients. You want to propose a new NS40G for the
account.
Which information must you have to ensure that the proposed solution will meet the customer’s
needs?
which two files need to be incrementally copied in order to have a consistent database?
After you have a fully replicated copy on the BCVs that contain an Oracle database, which two
files need to be incrementally copied in order to have a consistent database?
Which concern should you discuss with the customer?
A customer has asked you to review their procedures for securing backup media that contains
sensitive data. As part of your review, you discover that there are no details concerning how the
vendor actually transfers the tapes between the data center and the long-term offsite storage
facility.
Which concern should you discuss with the customer?
How many disks will you need if you use only 4+4 RAID 1/0 groups?
ABC.com has an application running on JBOD and wants to install a CLARiiON to host the
application data. You determine that the application has a read/write ratio of 3:1 and a total of
1,000 4 KB random I/Os per second. Assume that the disks you will use in the CLARiiON are
capable of 130 IOPS.
How many disks will you need if you use only 4+4 RAID 1/0 groups?
What would you recommend to improve the backup performance for this environment?
ABC.com is managing an EMC NetWorker environment with one EMC NetWorker server and one
storage node that backs up approximately 70 clients. The amount of data to back up increases
over a period of time that results in backups taking more than 24 hours to complete.
You use EMC Backup Advisor to analyze the current environment and find that the tape
infrastructure and the network are performing fine.
What would you recommend to improve the backup performance for this environment?
What is the impact on virtual volume availability when one node of the Control Path Cluster (CPC) fails?
ABC.com has dual-mirrored Cisco fabrics with Invista virtualization. What is the impact on virtual
volume availability when one node of the Control Path Cluster (CPC) fails?
what is a common best practice used to estimate response times from a given resource as utilization increases?
When designing a storage solution, what is a common best practice used to estimate response
times from a given resource as utilization increases?
Which approach best addresses these requirements?
ABC.com plans to use MirrorView/S between two CX3-80 arrays at remote facilities. During your
design meeting, the customer indicated that they will be mirroring LUNs on each array with bidirectional mirroring between the arrays. The customer wants to:
Reduce the time required to re-sync the mirrors if the link goes down
Provide redundancy in the event of a storage processor failure
Minimize the performance impact on each server
Which approach best addresses these requirements?
What is a valid design?
A service provider wishes to offer replicated archiving services to their customers. Customer data
will then be replicated internally for disaster recovery. The service provider would like to have 10
customers replicate to one EMC Centera in their data center and then replicate the central EMC
Centera to two separate remote facilities for disaster tolerance.
What is a valid design?