what should be checked first?
Refer to the Exhibit.
A customer is concerned about poor performance across HBA0 on a
Windows 2k3 host. HBA0 is plugged into port 0 on a DS-16B3. The customer has seen some
errors in porterrshow. Based on the output in the exhibit, what should be checked first?
What went wrong?
Your customer is implementing a META SAN in a B-series AP-7420B environment. They want to
connect a host from fabric A with storage in fabric B. The host is connected to port 14 on the
switch with Domain ID 2. The storage port is on port 7 on a switch with Domain ID 4. The
customer created in both of the fabrics the zones with the following command: zonecreate
“lsan_hostA_storageB”, “2, 14” and zoneadd “lsan_hostA_storageB”, “4, 7”. After enabling the
config the customer cannot see the storage. What went wrong?
What does the customer need to do to fix this problem?
Refer to the Exhibit.
Your customer is implementing iSCSI to boot his Windows 2003 server.
When he installs the iSCSI driver and wants to choose the target to connect to, the field is empty
(see exhibit). What does the customer need to do to fix this problem?
Which Connectrix B-series routing policies should be used?
Customer requires dynamic SAN routing and load balancing across multiple links. Which
Connectrix B-series routing policies should be used?
What should be installed to connect the SAN islands?
Refer to the Exhibit.
Your customer would like their four SAN islands (see diagram) connected
so that each fabric can see the devices in the other fabric. The fabrics A, B, C, D need to stay
separate entities. What should be installed to connect the SAN islands?
What should be done when implementing the new configuration?
An EMC Avamar customer is currently using a 2 TB Avamar Virtual Edition (AVE) for their backup
environment. They want to begin backing up several Oracle databases and file servers running on
a new ESX server. It is determined that a separate AVE should be added to the backup
environment for these new backups.
What should be done when implementing the new configuration?
When is the backup data deleted from the Data Domain system?
An EMC Avamar customer is running a backup that is being directed to a Data Domain system.
The backup has completed successfully; however, it is no longer needed. From Avamar
Administrator, the customer manually deletes the backup.
When is the backup data deleted from the Data Domain system?
What is the correct response to the customer?
An EMC employee has been assigned to run securedelete against two clients for a total of 20 GBs
on an Avamar server. During a planning discussion with the customer, they want to know what the
impact on their Avamar server would be while securedelete is running.
What is the correct response to the customer?
what should be recommended?
A new EMC Avamar customer wants help in setting up their backup groups and schedules. They
are migrating from a traditional tape backup solution with full backups performed once a week and
incrementals in between. They have a regulatory requirement to keep an annual backup for seven
years but want to keep all other backups for one month. Both Microsoft Windows and Linux clients
will be backed up. Based on best practices, what should be recommended?
What will occur when the NDMP backups start using default settings?
A customer has an EMC Avamar system backing up a Celerra running DART 6.0 using a single 36
GB NDMP Accelerator Node. They are also going to back up a VNX OE 7.0 system using the
same NDMP Accelerator. Each NAS device has four volumes configured on it. Backups will be
configured on the Avamar system for both NAS storage devices to start at the same time.
What will occur when the NDMP backups start using default settings?